Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green printed circuit board with black memory chips and gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 6400 CL52 1.1V 2Rx8 ECC RDIMM MZ33-CP1 memory upgrade

SKU CH-P7MH-NVJSQ

32GB DDR5 6400 CL52 1.1V 2Rx8 ECC registered RDIMM validated for the GIGABYTE MZ33-CP1 motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 32GB

Vis 24 flere konfigurationer
  • Exact DDR5-6400 CL52 1.1V 2Rx8 spec matches GIGABYTE MZ33-CP1 memory controller for full-speed operation
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors for enterprise stability
  • 32 GB capacity in 288-pin RDIMM form factor fits required slot type without adapters
  • Built with major OEM Samsung Micron Hynix DRAM chips for consistent server-grade reliability
  • Lifetime replacement coverage with US-based technical support included

Server-grade DDR5 ECC RDIMM

This NEMIX RAM module delivers 32GB of DDR5 memory at 6400 MT/s with CL52 latency and 1.1V operation. It uses a 2Rx8 registered ECC design on a 288-pin form factor built for server platforms. The specification matches the exact timing, voltage and rank the memory controller expects.

For GIGABYTE MZ33-CP1 motherboards

Builders upgrading a GIGABYTE MZ33-CP1 board that requires registered DDR5 ECC RDIMMs will find this module verified for that platform. Systems needing unbuffered UDIMMs, SODIMMs or non-ECC memory cannot use this part. Buyers without access to their motherboard manual for population rules should confirm compatibility first.

Fits registered DDR5 server channels

The 288-pin RDIMM installs directly into the server motherboard's DDR5 registered DIMM slots. Its registered architecture reduces electrical load on the memory controller when all slots are populated. ECC capability corrects single-bit errors automatically, protecting data integrity without extra software overhead.

Fordele

  • Exact DDR5-6400 CL52 1.1V 2Rx8 spec matches GIGABYTE MZ33-CP1 memory controller for full-speed operation
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors for enterprise stability
  • 32 GB capacity in 288-pin RDIMM form factor fits required slot type without adapters
  • Built with major OEM Samsung Micron Hynix DRAM chips for consistent server-grade reliability
  • Lifetime replacement coverage with US-based technical support included

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What motherboard must I already own for this 32GB DDR5 6400 CL52 RDIMM to be recognised at full capacity?

The module is validated for the GIGABYTE MZ33-CP1 motherboard; that board's memory controller expects exactly this rank, voltage and timing combination.

Will this 2Rx8 registered ECC DDR5 module work in the same channels as older unbuffered DDR5 UDIMMs I might keep?

No — registered RDIMMs and unbuffered UDIMMs use different signalling and cannot be mixed on the same motherboard.

How can I confirm the kit is running at its rated 6400 MT/s and CL52 after installation?

Check the memory speed and latency reported in the system BIOS or a hardware-monitoring utility; they should show DDR5-6400 and CL52.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.