NEMIX RAM
NEMIX RAM 384GB 6x64GB DDR5 6400 CL52 2Rx4 ECC RDIMM Supermicro H14SHM memory upgrade
384 GB DDR5 6400 ECC registered RDIMM kit in six 64 GB modules at CL52 1.1 V for Supermicro H14SHM
- Capacity384GB (6 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact 384 GB capacity in a 6 × 64 GB DDR5-6400 kit
- CL52 latency and 1.10 V voltage match the server controller specs
- 2Rx4 registered ECC RDIMM design prevents silent data corruption
- 288-pin DDR5 form factor fits the Supermicro H14SHM motherboard
- Lifetime replacement warranty with free US-based technical support
Exact-match DDR5-6400 ECC RDIMM kit
This NEMIX RAM kit delivers 384 GB across six 64 GB DDR5-6400 registered ECC modules. Each stick runs at 1.1 V with CL52 latency in a 2Rx4 layout. The 288-pin RDIMM form factor is built for the Supermicro H14SHM motherboard and its memory controller expectations.
Verify board population rules and slot count
Check the H14SHM manual for approved DIMM population order and maximum supported capacity per channel. Confirm the board has six available RDIMM slots and that your BIOS revision recognises 64 GB 2Rx4 modules at full speed. Registered ECC memory requires a compatible server chipset to initialise correctly.
Suits admins expanding a validated H14SHM build
Ideal for operators scaling a confirmed Supermicro H14SHM configuration to 384 GB with matched registered ECC modules. Not suited for workstations or consumer boards that accept only unbuffered UDIMM memory, nor for systems limited to lower per-slot capacities or different DDR generations.
Fordele
- Exact 384 GB capacity in a 6 × 64 GB DDR5-6400 kit
- CL52 latency and 1.10 V voltage match the server controller specs
- 2Rx4 registered ECC RDIMM design prevents silent data corruption
- 288-pin DDR5 form factor fits the Supermicro H14SHM motherboard
- Lifetime replacement warranty with free US-based technical support
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K6 |
| Capacity | 384GB (6 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 6X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Does the 384 GB kit include six 64 GB DDR5 RDIMMs or do I need to buy modules separately?
The kit ships as six 64 GB DDR5 6400 CL52 2Rx4 ECC Registered RDIMMs, giving the full 384 GB capacity in one package.
Should I choose the CL52 2Rx4 1.1 V version or a different timing and rank for my Supermicro H14SHM?
This exact-match kit uses CL52, 2Rx4 organisation and 1.1 V — the precise latency, rank and voltage the H14SHM memory controller expects for full-speed operation.
Will the DDR5 6400 (PC5-51200) rating actually run at 6400 MT/s once installed in the H14SHM?
Yes, the modules are spec-matched to the board's population rules so every slot runs fully populated at the rated 6400 MT/s speed.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



