Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 4GB DDR3 1866 PC3-14900 CL13 1.35V 240-Pin UDIMM desktop RAM

SKU CH-3G2P-CV0WD

A 4GB DDR3 desktop module running at 1866MHz with CL13 latency and 1.35V operation

  • Capacity4GB
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCNo

Capacity 4GB

  • 4GB capacity supports everyday multitasking with DDR3 1866 speed
  • CL13 latency at 1.35V reduces power draw versus standard 1.5V DDR3
  • 240-pin UDIMM fits standard desktop motherboards without ECC or buffering
  • Major OEM chips from Samsung Micron Hynix ensure module reliability
  • Rigorous stress testing under load validates stability for critical workloads

Capacity and Fit

This NEMIX RAM module delivers 4GB of DDR3 memory at 1866 MT/s with a CL13 latency. It is built as a single 240-pin UDIMM for desktop systems that accept unbuffered, non-ECC DIMMs.

Motherboard Compatibility

Verify that your board supports DDR3 at the PC3-14900 data rate and can run at 1.35 V. The stick uses major-brand Samsung, Micron or Hynix chips in a 2Rx8 organisation and has no heat spreader, so it fits standard DIMM slots without extra clearance.

Thermals and Power

Operating at the low 1.35 V level reduces power draw and heat output compared with standard 1.5 V DDR3. Passive cooling from case airflow is sufficient for normal workloads, and the module runs silently because it has no fan or moving parts.

Fordele

  • 4GB capacity supports everyday multitasking with DDR3 1866 speed
  • CL13 latency at 1.35V reduces power draw versus standard 1.5V DDR3
  • 240-pin UDIMM fits standard desktop motherboards without ECC or buffering
  • Major OEM chips from Samsung Micron Hynix ensure module reliability
  • Rigorous stress testing under load validates stability for critical workloads

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD14900-428K1
Capacity4GB
Type240-Pin DDR3 UDIMM
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What comes in the box and is anything else needed to install the 240-pin UDIMM?

The module itself is supplied; no extra parts are required beyond a compatible DDR3 motherboard slot.

Which capacity and speed version should I choose for a DDR3 1866 PC3-14900 upgrade?

This listing is a single 4GB stick rated at 1866 MT/s with CL13 timing; select it when your board supports that exact speed and voltage.

What does the 1866 MT/s rating mean once the stick is seated in a real machine?

It sets the maximum data rate the module can run at; the system will operate at the highest speed both the CPU memory controller and motherboard allow.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.