NEMIX RAM
NEMIX RAM 576GB 12x48GB DDR5 6400 CL52 1.1V ECC RDIMM Kit Supermicro H14DSG-OD
576 GB DDR5-6400 ECC registered kit with twelve 48 GB modules at 1.1 V and CL52, validated for the Supermicro H14DSG-OD motherboard
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576GB total capacity from 12 matched 48GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated bandwidth at 1.1V
- Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
- Exact-fit 288-pin kit validated for Supermicro H14DSG-OD memory population rules
- Lifetime replacement coverage with US-based technical support included
Capacity and fitment
This 576GB kit delivers 12 modules of 48GB each as DDR5 6400 RDIMMs with ECC and registered buffering at 1.10V and CL52 latency. It is built for the Supermicro H14DSG-OD motherboard and matches the exact rank, voltage and timing that board expects.
Upgrade path
The kit replaces smaller DDR5 RDIMM configurations or mixed-capacity sets that prevent full-channel population at rated speed. The jump is worth it when all 12 slots must run at 6400 MT/s with registered ECC stability and no downclocking caused by population rules.
DDR5 interface limits
DDR5 registered DIMMs require a motherboard that supports the 288-pin RDIMM form factor and the specific population order documented for this platform. Boards limited to UDIMM or SODIMM slots cannot accept these modules, and exceeding the approved slot count will prevent boot or force reduced speeds.
Fordele
- 576GB total capacity from 12 matched 48GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated bandwidth at 1.1V
- Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
- Exact-fit 288-pin kit validated for Supermicro H14DSG-OD memory population rules
- Lifetime replacement coverage with US-based technical support included
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Will these 288-pin DDR5 RDIMMs physically fit the Supermicro H14DSG-OD motherboard?
Yes, the 12 modules are 288-pin DDR5 RDIMMs, the exact form factor the H14DSG-OD requires. UDIMMs or SODIMMs will not seat in these slots.
What is the correct population order for all 12 slots on the H14DSG-OD?
The motherboard manual defines the approved DIMM population sequence; follow that order exactly so the memory controller recognises the full 576 GB at DDR5-6400.
Do these registered ECC modules need any firmware updates or periodic maintenance?
No firmware updates are required for the memory itself; ECC error correction runs automatically. Replace a module only if the system logs uncorrectable errors.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



