NEMIX RAM
NEMIX RAM 576GB 6x96GB DDR5 6400 CL52 1.1V 2Rx4 ECC RDIMM Supermicro H13SVW-NT memory upgrade
A 576GB kit of six 96GB DDR5 6400 CL52 1.1V 2Rx4 ECC registered RDIMMs validated for the Supermicro H13SVW-NT motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules for large-scale server workloads
- DDR5 6400 speed rated at PC5-51200 for high-throughput memory bandwidth
- CL52 CAS latency at 1.1 V for efficient registered operation
- 2Rx4 ECC RDIMM design corrects single-bit errors and buffers every slot
- 288-pin RDIMM form factor validated for Supermicro H13SVW-NT motherboard
Exact-match 576GB DDR5-6400 kit
This NEMIX RAM kit delivers 576GB of DDR5 memory in six 96GB registered ECC RDIMM modules. It is built for servers and workstations that require the full capacity and error-correction of a fully populated Supermicro H13SVW-NT motherboard. Each module runs at 6400 MT/s with CL52 latency at 1.10V, matching the exact rank and timing the platform expects.
Replaces mismatched or partial DIMM sets
The kit is worth installing when a system currently runs mixed-capacity DIMMs, slower speeds or fewer than six modules and needs every slot filled with identical 2Rx4 registered parts. Registered architecture offloads the memory controller so all six slots operate at rated capacity and speed, while ECC corrects single-bit errors before they affect production workloads.
Verify population rules and slot order
Before ordering, consult the motherboard manual for supported maximum capacity per slot, approved DIMM population sequence and any BIOS version requirements. The board requires 288-pin RDIMM form factor — not UDIMM or SODIMM — and the manual will confirm the exact installation order for a six-module configuration.
Fordele
- 576 GB total capacity from six 96 GB modules for large-scale server workloads
- DDR5 6400 speed rated at PC5-51200 for high-throughput memory bandwidth
- CL52 CAS latency at 1.1 V for efficient registered operation
- 2Rx4 ECC RDIMM design corrects single-bit errors and buffers every slot
- 288-pin RDIMM form factor validated for Supermicro H13SVW-NT motherboard
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Will the 288-pin RDIMM modules fit the DIMM slots on my Supermicro H13SVW-NT motherboard?
Yes, the 288-pin Registered DDR5 form factor matches the slots on the Supermicro H13SVW-NT.
What is the correct population order when installing all six 96GB modules?
Follow the motherboard manual for the approved DIMM population sequence; the kit is spec-matched to the board's memory-population rules.
Do these registered ECC modules require any firmware updates or periodic maintenance after installation?
No firmware updates or scheduled maintenance are needed; ECC corrects single-bit errors automatically during operation.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



