Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 UDIMM sticks, no heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM memory upgrade

SKU CH-AE2T-F96N0

64 GB kit of two 32 GB DDR5 5600 CL46 unbuffered UDIMM modules at 1.1 V for Supermicro systems

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • 64 GB dual-channel kit doubles usable memory bandwidth
  • DDR5 5600 MT/s speed raises data throughput for heavy workloads
  • CL46 latency keeps response times tight under load
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro SYS-531AD-I C9Z790-CG workstation compatibility

SuperMicro Compatible DDR5 Kit

This 64 GB kit contains two 32 GB unbuffered UDIMM modules built for SuperMicro desktop workstations such as the SYS-531AD-I and C9Z790-CG. It targets system integrators and power users who need validated, non-ECC memory for those specific platforms.

DDR5 5600 Speed Limit

The modules run at DDR5 5600 (PC5-44800) with a base voltage of 1.10 V and CAS latency of 46. Performance is bound by this JEDEC-standard data rate; the kit does not support higher frequencies or lower latencies without manual tuning.

Dual-Rank 2Rx8 Density

Each 32 GB stick uses a 2Rx8 organisation, filling two ranks per module across the 288-pin interface. Boards limited to single-rank DIMMs or lower maximum capacity per slot will not accept this configuration.

Fordele

  • 64 GB dual-channel kit doubles usable memory bandwidth
  • DDR5 5600 MT/s speed raises data throughput for heavy workloads
  • CL46 latency keeps response times tight under load
  • 10 V operation reduces power draw and heat output
  • Validated for SuperMicro SYS-531AD-I C9Z790-CG workstation compatibility

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose the 64 GB kit as two 32 GB modules or look for a different capacity?

This kit provides 64 GB total using two 32 GB modules, giving you dual-channel bandwidth on a desktop board that supports DDR5 UDIMM.

What does the 5600 MT/s rating mean once the memory is installed in a Supermicro workstation?

The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.1 V, delivering the rated transfer rate when the motherboard enables the standard JEDEC profile.

How does the 288-pin DDR5 UDIMM interface limit performance in practice?

The 288-pin unbuffered DDR5 interface caps the kit at the JEDEC 5600 MT/s data rate and CL46 timing; higher speeds would require motherboard overclocking support not guaranteed by this specification.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.