Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green bare circuit board memory module with gold edge connectors and black chips

NEMIX RAM

NEMIX RAM 64GB DDR5 6400 CL52 4Rx4 1.1V ECC RDIMM memory upgrade for Supermicro X14SDW-64CM-SP9F

SKU CH-6HVH-2VSQ2

64GB DDR5 6400 CL52 ECC registered RDIMM built for the Supermicro X14SDW-64CM-SP9F motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB

Vis 4 flere konfigurationer
  • Exact-match DDR5-6400 CL52 1.10V registered ECC for Supermicro X14SDW-64CM-SP9F
  • 64GB 4Rx4 288-pin RDIMM recognised at full capacity and rated speed
  • Registered architecture offloads the memory controller enabling full population stability
  • On-die ECC corrects single-bit errors preventing silent data corruption and reboots
  • Lifetime replacement warranty with free US-based technical support included

Exact-Match DDR5 RDIMM for Supermicro X14SDW

This 64GB DDR5-6400 registered ECC module is built to the precise rank, voltage, and timing the Supermicro X14SDW-64CM-SP9F memory controller expects. It delivers 64GB in a single 288-pin RDIMM so the board recognises full capacity at rated speed.

Straightforward 288-pin RDIMM installation

The module seats in the standard DDR5 RDIMM slots using the board's documented population order. Registered buffering offloads the controller, so every slot runs fully populated; the only common issue is ignoring the manual's slot sequence, which can prevent the system from posting at full capacity.

64GB single-module capacity with ECC headroom

One module provides 64GB of registered ECC memory, correcting single-bit errors on the fly to stop silent data corruption. Capacity scales by adding identical modules per the motherboard's supported configuration; the limit is the board's maximum supported memory and approved population rules.

Fordele

  • Exact-match DDR5-6400 CL52 1.10V registered ECC for Supermicro X14SDW-64CM-SP9F
  • 64GB 4Rx4 288-pin RDIMM recognised at full capacity and rated speed
  • Registered architecture offloads the memory controller enabling full population stability
  • On-die ECC corrects single-bit errors preventing silent data corruption and reboots
  • Lifetime replacement warranty with free US-based technical support included

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I confirm the module runs at DDR5 6400 with CL52 after installation?

Enter the system BIOS or UEFI and verify the memory frequency shows 6400 MT/s and the CAS latency reads 52. The registered ECC design ensures the controller recognises the 4Rx4 rank at 1.1 V, so the POST screen should report the full 64 GB capacity without errors.

What ships in the package and do I need extra parts for the Supermicro X14SDW-64CM-SP9F?

The box contains one 64 GB DDR5 6400 PC5-51200 4Rx4 1.1 V CL52 288-pin ECC registered RDIMM. No additional cables, brackets or cooling are required; the motherboard’s 288-pin RDIMM slots accept the module directly.

Which version should I choose if my manual lists 4Rx4 registered ECC at 1.1 V?

Select this exact MR51200-944K1 kit. It matches the 4Rx4 registered ECC layout, 1.1 V operation and CL52 timing your board expects, ensuring full-capacity recognition and rated-speed operation.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.