Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Eight green DDR5 RDIMM modules without heat spreaders in a row

NEMIX RAM

NEMIX RAM 768GB 8x96GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-1CY6-17HNG

Eight 96 GB DDR5 RDIMM modules deliver 768 GB of registered ECC memory at 4800 MT/s for the Supermicro H14DSG-O-CPU motherboard

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Vis 30 flere konfigurationer
  • 768 GB total capacity lets fully populated servers run at scale
  • DDR5 4800 speed with CL40 timing delivers rated throughput on supported platforms
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 2Rx4 1.10 V modules match the Supermicro H14DSG-O-CPU motherboard requirements
  • 8 x 96 GB 288-pin RDIMM kit installs directly into compatible server slots

Exact-Match DDR5 Server Kit

This 768GB kit delivers eight 96GB DDR5 4800 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H14DSG-O-CPU motherboard expects. The modules install as a matched set so the controller recognises full capacity at rated speed without manual tuning.

For Fully Populated Enterprise Boards

It suits administrators who need every slot filled with registered ECC memory on this specific Supermicro platform. Builders using consumer UDIMMs, SODIMMs or non-ECC modules should look elsewhere because the board requires 288-pin RDIMMs with registered buffering.

Capacity and Headroom

Eight dual-rank 96GB modules provide 768GB total, letting memory-intensive workloads run without swapping. The registered architecture keeps all slots stable at full population, while ECC corrects single-bit errors on the fly. The kit reaches its limit when the motherboard's maximum supported capacity or population rules are exceeded.

Fordele

  • 768 GB total capacity lets fully populated servers run at scale
  • DDR5 4800 speed with CL40 timing delivers rated throughput on supported platforms
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 2Rx4 1.10 V modules match the Supermicro H14DSG-O-CPU motherboard requirements
  • 8 x 96 GB 288-pin RDIMM kit installs directly into compatible server slots

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What motherboard must I already have for this 8-module DDR5 4800 kit to be recognised at full 768GB capacity?

The kit is validated for the Supermicro H14DSG-O-CPU motherboard; its memory controller expects the exact 2Rx4 registered ECC timing and 1.1V voltage this kit provides.

Will my existing DDR5 4800 RDIMMs of a different rank or voltage run reliably alongside these 96GB 2Rx4 modules?

Mixing ranks or voltages is not recommended; the board's memory population rules require identical 2Rx4 registered ECC modules at 1.1V to keep all slots stable at the rated 4800 speed.

How can I confirm the system is using all 768GB at the specified CL40 latency after installation?

Enter the BIOS or run a hardware inventory tool such as dmidecode; it should report eight 96GB DDR5 4800 registered ECC DIMMs operating at 1.1V with CAS latency 40.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.