Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-PIN SODIMM POSIFLEX XT-5517 memory upgrade

SKU CH-E4QZ-6R9V7

8GB DDR3 1333 SODIMM upgrades POSIFLEX XT-5517 terminals with 1.35V low-voltage operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity boosts multitasking on POS terminals
  • DDR3 1333 speed matches system memory bus
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits POSIFLEX XT-5517 slot
  • Major OEM chips ensure reliable operation

Designed for POSIFLEX XT-5517 terminal

This 8 GB DDR3 SODIMM is built specifically for the POSIFLEX XT-5517 JIVA Foldable 17-inch terminal. It uses a 204-pin form factor and runs at 1333 MHz with CL9 latency. The module is non-ECC and unbuffered for direct compatibility.

DDR3 1333 limits bandwidth to PC3-10600

The DDR3 1333 interface caps theoretical throughput at PC3-10600 speeds. Systems requiring higher memory bandwidth or newer DDR generations cannot use this module. The 1.35 V operating voltage reduces power draw compared to standard 1.50 V DDR3 parts.

Single 8 GB 2Rx8 module fills one slot

This kit provides one 8 GB stick organised as 2Rx8, occupying a single SODIMM slot. Buyers needing more than 8 GB of total memory must verify how many slots their terminal provides and whether larger modules are supported.

Fordele

  • 8GB capacity boosts multitasking on POS terminals
  • DDR3 1333 speed matches system memory bus
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits POSIFLEX XT-5517 slot
  • Major OEM chips ensure reliable operation

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spørgsmål om denne vare

Is the 8GB DDR3 1333 module the only capacity offered for the POSIFLEX XT-5517?

This listing provides a single 8GB DDR3 1333 SODIMM (PC3-10600, CL9, 2Rx8, 1.35V). No other capacities appear in the product data for this terminal.

What does the PC3-10600 rating mean for daily use on the XT-5517?

PC3-10600 indicates a peak transfer rate of 10600 MB/s at 1333 MT/s, giving the POS terminal enough bandwidth for typical point-of-sale workloads.

Will the 204-pin SODIMM work with the DDR3 memory controller in the XT-5517?

Yes. The module is a 204-pin DDR3 SODIMM rated at 1.35V (also rated at 1.50V) and is specified as compatible with the POSIFLEX XT-5517.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.