eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
25,99 US$
0.00033156BTC
På lager
NEMIX RAM
NEMIX RAM 8GB DDR4 2400 PC4-19200 CL17 1Rx8 1.2V 288-Pin UDIMM memory upgrade
An 8 GB DDR4 2400 UDIMM module running at 1.2 V with CL17 latency for desktop upgrades
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity adds responsive multitasking headroom
- DDR4 2400 speed delivers 19200 MB/s peak bandwidth
- CL17 latency keeps data access tight
- 2 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop DIMM slots
8 GB DDR4 2400 UDIMM for desktop upgrade
This 8 GB DDR4 2400 module fits standard 288-pin UDIMM slots on compatible desktop motherboards. It is built for owners of Hynix-based systems who need a straightforward capacity increase. The stick uses major OEM chips from Samsung Micron or Hynix and runs at the standard 1.2 V.
Steady throughput at CL17 latency
Under continuous workloads the module maintains its rated 2400 MT/s transfer rate with a CAS latency of 17 cycles. The unbuffered non-ECC design keeps signal paths short so sustained reads and writes stay consistent without registered overhead. Rigorous stress testing under load verifies stability for long sessions.
Single rank 1Rx8 organisation decides fit
The 1Rx8 rank layout determines whether the board's memory controller can address the full 8 GB in a single slot. Boards that require dual-rank or x4 organisation will not recognise the capacity correctly. Match this rank spec to the system manual before purchase.
Fordele
- 8 GB capacity adds responsive multitasking headroom
- DDR4 2400 speed delivers 19200 MB/s peak bandwidth
- CL17 latency keeps data access tight
- 2 V operation reduces power draw and heat
- 288-pin UDIMM fits standard desktop DIMM slots
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD19200-818K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN Non-ECC Unbuffered UDIMM |
Spørgsmål om denne vare
How much power does this 1.2 V DDR4 2400 module draw during all-day use?
It runs at the standard DDR4 voltage of 1.2 V, keeping heat and power draw low for continuous operation.
What motherboard slot is required for this 288-pin UDIMM to work?
A desktop board with a standard 288-pin DDR4 DIMM slot that supports non-ECC unbuffered memory.
Will this CL17 2400 MHz stick run stably alongside 2666 MHz modules I already own?
Yes — the system will clock both modules down to the lowest common speed, so the 2400 MHz module works with faster DDR4 kits.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
32,99 US$
0.00042087BTC
På lager
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
23,99 US$
0.00030605BTC
På lager
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
21,99 US$
0.00028053BTC
På lager