Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1Rx8 1.1V SODIMM memory upgrade

SKU CH-H4SF-F5Z10

8GB DDR5 SODIMM running at 5600MHz CL46 and 1.1V, verified for Supermicro X14SAV-TLN4F motherboards

  • Capacity8GB
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Ready for full-speed DDR5 5600 operation with CL46 timing
  • Exact 262-pin SODIMM fit for Supermicro X14SAV-TLN4F motherboard
  • Low 1.1V draw keeps laptop thermals in check
  • Built from major OEM Samsung, Micron or Hynix chips for stability
  • 8GB single-rank 1Rx8 module installs without configuration hassle

8GB DDR5 5600MHz SODIMM upgrade

This 8GB DDR5 module runs at 5600MHz with CL46 timing at 1.10V. It uses a 262-pin SODIMM form factor and 1Rx8 unbuffered non-ECC chips from major OEM suppliers. The specification matches the Supermicro X14SAV-TLN4F motherboard for a direct memory upgrade.

Who this suits and who should look elsewhere

The module suits owners of the named Supermicro board needing an exact-match DDR5 SODIMM. It is not for desktop systems requiring UDIMMs, nor for laptops limited to lower DDR5 speeds or different pin counts. Buyers needing ECC or registered memory must choose a different part.

262-pin DDR5 SODIMM at 5600MHz

The 262-pin DDR5 SODIMM layout at 5600MHz is the single specification that decides fitment. Only systems designed for this exact pin count, voltage and speed will recognise the module at full capacity.

Fordele

  • Ready for full-speed DDR5 5600 operation with CL46 timing
  • Exact 262-pin SODIMM fit for Supermicro X14SAV-TLN4F motherboard
  • Low 1.1V draw keeps laptop thermals in check
  • Built from major OEM Samsung, Micron or Hynix chips for stability
  • 8GB single-rank 1Rx8 module installs without configuration hassle

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-818K1
Capacity8GB
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does my laptop need a 262-pin DDR5 SODIMM slot to use this 8 GB module?

Yes — the module is a 262-pin DDR5 SODIMM, so it only fits a DDR5 SODIMM socket such as the one on the Supermicro X14SAV-TLN4F motherboard.

Will this CL46 DDR5-5600 stick down-clock automatically if I keep an older DDR5 module rated at a lower speed?

The memory controller will run both modules at the lowest common speed and timing, so the 5600 MHz CL46 stick will operate at the slower module's frequency and latency.

How can I confirm the kit is running at 5600 MHz and CL46 after installation?

Open Task Manager's Performance tab or run CPU-Z; both will show the current DRAM frequency at 5600 MT/s and the CAS latency at CL46 when the system is operating as specified.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.