Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 4800 ECC UDIMM CL40 1.1V 2Rx8 memory upgrade

SKU CH-1BCA-M6RSH

A 96 GB DDR5 ECC UDIMM kit running at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro X14SAE motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

  • ECC protection prevents silent data corruption
  • 96GB total capacity across two 48GB modules
  • DDR5 4800 speed with CL40 latency
  • 1V low-voltage operation reduces power draw
  • Verified fit for Supermicro X14SAE motherboard

Exact-match DDR5 ECC kit for Supermicro X14SAE

This 96GB kit delivers two 48GB DDR5 4800 UDIMM modules built to the board's native PC5-38400 specification. The 2Rx8 unbuffered ECC design matches the memory controller's expected rank, voltage and timing so the system recognises the full capacity at rated speed.

DDR5 4800 PC5-38400 sets the speed ceiling

The platform's memory controller tops out at 4800 MT/s with a CL40 latency at 1.1V, so faster modules will downclock to this limit. ECC operation adds single-bit error correction but does not raise the bandwidth beyond the PC5-38400 rating defined for this board.

Tool-free DIMM installation with population rules

Align the 288-pin key notch, press until the retention clips click, and follow the manual's slot order for dual-channel operation. Common issues are mixing UDIMMs with RDIMMs, skipping the prescribed population sequence, or exceeding the board's maximum supported capacity per slot.

Fordele

  • ECC protection prevents silent data corruption
  • 96GB total capacity across two 48GB modules
  • DDR5 4800 speed with CL40 latency
  • 1V low-voltage operation reduces power draw
  • Verified fit for Supermicro X14SAE motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME38400-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I pick the 96GB kit or a different capacity for my Supermicro X14SAE?

The kit provides 96GB total in two 48GB modules. Choose this capacity if your board and CPU support 96GB of DDR5 ECC UDIMM; otherwise consult your motherboard manual for the maximum supported capacity and approved population order.

What does DDR5 4800 CL40 mean for real-world throughput?

The modules run at 4800 MT/s with a CAS latency of 40 cycles, delivering the rated PC5-38400 bandwidth when the motherboard trains them at that speed and timing.

Will the 288-pin ECC UDIMM interface work at full speed on my X14SAE?

Yes, the 288-pin unbuffered ECC UDIMM form factor matches the X14SAE's DDR5 slots, allowing the kit to operate at its specified 4800 MT/s CL40 1.1V settings when populated per the board's guidelines.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.