Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular DDR5 RDIMM circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSH memory upgrade

SKU CH-E6VM-P0B56

96GB DDR5 4800 ECC registered RDIMM built for the Supermicro H13SSH motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

Vis 30 flere konfigurationer
  • 96 GB capacity lets you fully populate Supermicro H13SSH slots
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 2Rx4 registered ECC architecture offloads the memory controller for stable full-population operation
  • 1 V DDR5 voltage aligns with the server's memory-controller requirements
  • 288-pin RDIMM form factor fits the H13SSH motherboard exactly

Exact-Match 96GB DDR5-4800 RDIMM

This 96GB DDR5 4800 module is built for the Supermicro H13SSH motherboard. Registered ECC architecture with 2Rx4 organisation and CL40 timing matches the board's memory controller expectations. It installs as a direct upgrade without configuration changes.

288-Pin Registered Build

The 288-pin RDIMM form factor fits only Registered DIMM slots, not UDIMM or SODIMM sockets. Registered buffering offloads the memory controller so every populated slot runs at full rated capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption.

DDR5 4800 Interface Limits

DDR5 4800 (PC5-38400) sets the maximum transfer rate this module can deliver. Population rules in the system manual dictate how many DIMMs can run at this speed simultaneously. Exceeding the approved slot count or mixing ranks will reduce operating frequency.

Fordele

  • 96 GB capacity lets you fully populate Supermicro H13SSH slots
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 2Rx4 registered ECC architecture offloads the memory controller for stable full-population operation
  • 1 V DDR5 voltage aligns with the server's memory-controller requirements
  • 288-pin RDIMM form factor fits the H13SSH motherboard exactly

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does this DDR5-4800 RDIMM run at its rated 4800 MT/s on the Supermicro H13SSH, or is it capped by the platform?

The module is specified at DDR5 4800 (PC5-38400) with CL40 at 1.1 V. The H13SSH memory controller determines the final operating speed; this kit matches the board's rated DDR5-4800 profile so it will run at that speed when populated per the manual.

Will the 288-pin registered DIMM fit the H13SSH DIMM slots without clearance issues from CPU coolers or chassis walls?

The kit uses the standard 288-pin RDIMM form factor the H13SSH requires. It has no heat spreader, keeping the module at the JEDEC reference height, which minimises interference with most server CPU coolers and 1 U chassis lids.

What is the correct population order for a single 96 GB 2Rx4 RDIMM on the H13SSH, and which step do installers most often miss?

Consult the H13SSH manual for the exact slot sequence — typically the first slot of each memory channel. The step most often missed is fully seating the module until both ejector clips click, ensuring the registered buffer and ECC initialise correctly.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.