Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 256GB (8x32GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-WCJ3-PVYW1 MPN CSE-GS7A-000NBP3

A 256 GB kit of eight 32 GB DDR5 4800 CL40 ECC registered DIMMs for Supermicro workstations

  • Capacity256GB (8 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity across eight 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design protects data integrity
  • 10 V operating voltage reduces power draw
  • Validated for Supermicro SYS-751A-I workstation compatibility

System-specific DDR5 ECC kit

This 256 GB kit contains eight 32 GB DDR5 4800 CL40 registered DIMMs built for Supermicro SuperWorkstation SYS-751A-I and X13DAI-T platforms. It targets administrators who need maximum registered ECC capacity on those qualified systems.

DDR5 4800 registered ECC limits

The modules run at 1.10 V with a CL40 latency and a single-rank 1Rx4 organisation on the DDR5 4800 (PC5-38400) interface. Registered signalling and on-die ECC add command-cycle overhead that caps raw throughput compared with unbuffered memory.

Straightforward DIMM installation

The 288-pin RDIMMs seat in standard DDR5 slots without extra cables or firmware steps. Populating all eight channels requires the board to train each rank at 4800 MT/s; a single mismatched module or incorrect slot order will halt POST.

Fordele

  • 256 GB total capacity across eight 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design protects data integrity
  • 10 V operating voltage reduces power draw
  • Validated for Supermicro SYS-751A-I workstation compatibility

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K8
Capacity256GB (8 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Spørgsmål om denne vare

Should I choose the 256GB kit or look for a different capacity for my Supermicro SYS-751A-I?

This kit provides 256GB across eight 32GB modules, filling all eight slots on the Supermicro SYS-751A-I for maximum supported capacity.

What does the 4800 CL40 rating deliver in a real Supermicro SuperWorkstation?

The modules run at DDR5 4800 with CAS latency 40, giving 38400 MB/s peak bandwidth per module and registered ECC operation for error correction under load.

Does the 288-pin DDR5 RDIMM interface limit speed or capacity on the X13DAI-T motherboard?

The 288-pin RDIMM form factor is the native DDR5 server standard; the board's memory controller caps at 4800 MT/s, so this kit runs at the maximum supported data rate.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.