Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 RDIMM sticks without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 4800 192GB 2x96GB ECC RDIMM Supermicro H13SSH

SKU CH-94TE-RWPFW

192 GB DDR5-4800 registered ECC kit in two 96 GB modules, validated for the Supermicro H13SSH motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Vis 30 flere konfigurationer

De overstregede versioner findes, men er ikke på lager her.

  • 192 GB capacity in a 2×96 GB kit doubles server memory headroom
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for H13SSH workloads
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank matches the motherboard's exact voltage and population rules
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with Supermicro H13SSH slots

192GB DDR5 4800 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5 4800 Registered ECC RDIMMs built for the Supermicro H13SSH motherboard. Each module runs at 1.1V with CL40 latency and a 2Rx4 organisation. The 288-pin form factor matches the board's DIMM slots exactly.

Check Motherboard Population Rules

Verify the H13SSH manual for supported capacities per slot and the required population order before ordering. The board demands Registered RDIMMs — not UDIMMs or SODIMMs — and may limit total capacity or rank count depending on the CPU installed. Confirm your firmware version matches the vendor's qualified vendor list.

For Supermicro H13SSH Servers Needing Maximum

This kit suits administrators populating every slot on an H13SSH with Registered ECC memory at the board's native speed. Buyers using consumer motherboards, workstations requiring UDIMMs, or systems that cannot address 96GB per DIMM should look at something else.

Fordele

  • 192 GB capacity in a 2×96 GB kit doubles server memory headroom
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for H13SSH workloads
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank matches the motherboard's exact voltage and population rules
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with Supermicro H13SSH slots

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What comes in the box and is anything else required to install this memory?

The box contains the 192GB kit as two 96GB DDR5 4800 ECC registered RDIMMs. No extra parts or cables are needed; the modules slot directly into the Supermicro H13SSH motherboard.

Should I choose this 2 x 96GB kit or a different capacity for the H13SSH?

This kit provides 192GB total using two 96GB 2Rx4 modules at 1.1V CL40, matching the board's DDR5 RDIMM requirements. Pick it when your workload needs that full capacity and your manual confirms two-DIMM population.

What does the DDR5 4800 CL40 rating mean once the modules are running in the server?

The memory operates at 4800 MT/s with CAS latency 40 at 1.1V, delivering the exact speed and timing the H13SSH memory controller expects for stable, error-corrected operation across both slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.