Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5-4800 256GB (4×64GB) ECC RDIMM CL40 1.1V Supermicro H14DSG-O-CPU

SKU CH-57WR-3PVF4

256 GB DDR5-4800 ECC registered kit in four 64 GB modules at CL40 and 1.1 V for Supermicro H14DSG-O-CPU servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Vis 30 flere konfigurationer
  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage reduces power draw across fully populated slots
  • Verified fit for Supermicro H14DSG-O-CPU using 288-pin RDIMM form factor

Capacity and fit

This 256GB kit contains four 64GB DDR5 ECC Registered RDIMMs built for the Supermicro H14DSG-O-CPU motherboard. The modules arrive new and are intended for servers that require registered memory with error correction.

Decisive specification

The kit runs at DDR5-4800 with a CL40 latency at 1.1V using a 2Rx4 rank structure. This exact speed, voltage, timing and rank combination is what the board's memory controller expects for full-capacity recognition and rated operation.

Thermals and power

Modules operate at the standard 1.1V DDR5 voltage without a heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw steady across all four populated slots.

Fordele

  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage reduces power draw across fully populated slots
  • Verified fit for Supermicro H14DSG-O-CPU using 288-pin RDIMM form factor

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How does DDR5-4800 CL40 perform once installed in the Supermicro H14DSG-O-CPU?

The kit runs at the rated 4800 MT/s with CL40 timings at 1.1 V, giving the memory controller exactly the speed and latency it expects for full-capacity operation across all populated slots.

What does the 288-pin RDIMM interface limit in practice?

The 288-pin Registered DIMM form factor is required by the board; it will not accept UDIMM or SODIMM modules, and the registered buffer lets every slot run fully populated at the rated speed.

What physical clearance does the 4×64 GB kit need to fit?

Each module is a standard-height 288-pin RDIMM without a heat spreader, so it fits the motherboard's DIMM slots and works within the server chassis clearance specified for that form factor.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.