Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 256GB (8×32GB) CL40 1.1V ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-NA62-NBTBS

A 256 GB DDR5 kit of eight 32 GB registered ECC RDIMMs running at 4800 MT/s with CL40 latency and 1.1 V, validated for the Gigabyte MZ33-CP1 server motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Vis 18 flere konfigurationer
  • 256 GB total capacity from eight 32 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the MZ33-CP1
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the platform voltage spec for reliable recognition
  • 288-pin RDIMM form factor fits the board's memory slots exactly

Exact-Match DDR5 Kit for GIGABYTE MZ33-CP1

This 256GB kit delivers eight 32GB DDR5 4800 RDIMM modules built to the GIGABYTE MZ33-CP1 motherboard's exact specifications. Registered ECC architecture and CL40 timing at 1.1V ensure the memory controller recognises full capacity immediately. It targets administrators who need validated, high-density memory for production servers without compatibility risk.

Registered ECC Architecture Offloads the Controller

The 2Rx8 registered design buffers address and command signals so every one of the 288-pin slots can run fully populated at rated speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in always-on workloads. Builders using UDIMM or SODIMM slots cannot install these modules; the motherboard must accept registered DDR5 RDIMMs.

256GB Headroom for Dense Virtualisation

Eight ranks per channel provide the density needed for large virtual-machine fleets, in-memory databases or container clusters. The kit saturates the board's maximum supported capacity, so no further DIMMs can be added without replacing the entire set. Workloads that exceed 256GB or require faster DDR5 speeds will need a different platform.

Fordele

  • 256 GB total capacity from eight 32 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the MZ33-CP1
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the platform voltage spec for reliable recognition
  • 288-pin RDIMM form factor fits the board's memory slots exactly

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the 256GB kit run at the full 4800MHz speed when all eight 32GB RDIMMs are populated on the GIGABYTE MZ33-CP1?

Yes, the kit is spec-matched to the board's memory controller so all eight 2Rx8 modules operate at DDR5 4800 with CL40 timings at 1.1V when fully populated.

How much heat and power do eight 1.1V registered ECC modules produce under continuous server workloads?

Each 32GB RDIMM draws 1.1V with no heat spreader; the registered buffer reduces controller load, keeping thermals manageable in standard server airflow.

What motherboard feature must the GIGABYTE MZ33-CP1 provide for this 288-pin RDIMM kit to function?

The board must support DDR5 registered ECC memory with 2Rx8 population rules and 288-pin RDIMM slots — exactly what the MZ33-CP1 specifies.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.