Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 1.1TB 12x96GB CL40 2Rx4 Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-2R5A-F9T24

1.1 TB DDR5-4800 ECC registered RDIMM kit with twelve 96 GB modules at CL40 for Supermicro H13DSG-O-CPU-D

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Vis 30 flere konfigurationer
  • 1 TB total capacity across twelve 96 GB modules
  • DDR5-4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors on the fly
  • 2Rx4 organisation and 1.10 V voltage match the memory controller
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard

Capacity and fit

This 1.1 TB kit contains twelve 96 GB DDR5 RDIMMs built for the Supermicro H13DSG-O-CPU-D motherboard. Registered ECC modules offload the memory controller so every slot runs at the rated 4800 MT/s without manual tuning. IT teams and system integrators use it to max out supported capacity in a single validated package.

Thermals and power

Each module operates at 1.10 V with a CL40 timing and no heat spreader, relying on chassis airflow for cooling. Registered buffering reduces electrical load on the memory bus, keeping power draw predictable across all twelve slots. In typical server workloads the kit runs within standard DDR5 thermal limits without additional fan speed changes.

Upgrade scope

The kit replaces smaller-capacity RDIMM sets or mixed-rank configurations that limit total memory or force downclocking. It is not suited for boards that require UDIMM or SODIMM form factors, nor for systems that do not support 2Rx4 registered ECC at 4800 MT/s. Verify the motherboard manual for approved population order before installing.

Fordele

  • 1 TB total capacity across twelve 96 GB modules
  • DDR5-4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors on the fly
  • 2Rx4 organisation and 1.10 V voltage match the memory controller
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install the 12 DDR5 RDIMMs into the Supermicro H13DSG-O-CPU-D and which slot order should I follow?

Power down the server, open the chassis, and insert each 288-pin module into the DIMM slots following the population sequence shown in the motherboard manual; the board requires Registered ECC RDIMMs and will not accept UDIMMs or SODIMMs.

What maintenance or replacement will the 1.1TB DDR5 ECC RDIMM kit need during its service life?

No routine maintenance is required; the modules have no heat spreaders and rely on server airflow, so keep intake filters clean and if a module fails it is covered by a lifetime replacement warranty.

What is the first limit reached when the 12x96GB DDR5-4800 CL40 kit runs sustained workloads?

The memory controller on the H13DSG-O-CPU-D caps the kit at DDR5-4800 with CL40 timings at 1.10V, so bandwidth and latency are fixed by the platform rather than thermal throttling.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.