Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 32GB 2x16GB CL40 1.1V 288-pin Supermicro H13SSL-N memory upgrade

SKU CH-MKZT-0V3TG

32 GB DDR5-4800 ECC registered RDIMM kit (2 × 16 GB, CL40, 1.10 V) validated for Supermicro H13SSL-N motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Vis 24 flere konfigurationer
  • Exact-match 32 GB kit (2 × 16 GB) DDR5-4800 CL40 1.1 V for full-rated speed
  • Registered ECC RDIMM offloads controller and corrects single-bit errors on the fly
  • Verified fit for Supermicro H13SSL-N motherboard with 288-pin RDIMM slots
  • 1Rx8 rank and 1.1 V timing match board population rules for stable full-capacity use
  • Major OEM Samsung, Micron, Hynix chips with lifetime replacement warranty

Supermicro H13SSL-N DDR5 ECC RDIMM Kit

This 32GB kit contains two 16GB DDR5-4800 Registered ECC modules built to the exact specifications of the Supermicro H13SSL-N motherboard. The 1Rx8 organisation, CL40 timing and 1.10V voltage match the board's memory controller requirements for full-capacity recognition at rated speed.

288-Pin RDIMM Installation and Population Rules

The modules use the standard 288-pin RDIMM form factor required by the H13SSL-N and install like any server DIMM, but the board's population order and maximum supported capacity per slot are defined in the system manual. Skipping the manual's population sequence is the most common cause of modules not being detected or running at reduced speeds.

For Supermicro H13SSL-N Owners Needing Registered

This kit suits administrators upgrading a Supermicro H13SSL-N platform that requires Registered ECC DDR5 memory with a 1Rx8 rank structure. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC modules, or capacities and speeds not validated for this specific motherboard should look elsewhere.

Fordele

  • Exact-match 32 GB kit (2 × 16 GB) DDR5-4800 CL40 1.1 V for full-rated speed
  • Registered ECC RDIMM offloads controller and corrects single-bit errors on the fly
  • Verified fit for Supermicro H13SSL-N motherboard with 288-pin RDIMM slots
  • 1Rx8 rank and 1.1 V timing match board population rules for stable full-capacity use
  • Major OEM Samsung, Micron, Hynix chips with lifetime replacement warranty

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How can I confirm the kit is running at DDR5 4800 CL40 1.10V after installation?

Check the BIOS memory information or a tool like CPU-Z; it should report DDR5-4800 (PC5-38400), CAS latency 40, 1.10 V, and 32 GB total across both 16 GB modules.

What does the package contain and is anything else required for the Supermicro H13SSL-N?

The box includes the matched 32 GB kit — two 16 GB 288-pin DDR5 RDIMMs (1Rx8, Registered ECC). No extra parts are needed; the motherboard accepts this form factor directly.

This kit is 32 GB (2×16 GB); how do I decide if that capacity fits my H13SSL-N configuration?

Consult the Supermicro H13SSL-N manual for maximum supported capacity per slot, approved population order, and any per-channel limits before choosing this 2×16 GB kit.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.