NEMIX RAM
NEMIX RAM DDR5 5600 192GB (6x32GB) CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14SST-G memory upgrade
A 192 GB DDR5 ECC registered memory kit of six 32 GB modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H14SST-G motherboard
- Capacity192GB (6 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192 GB total capacity for large workloads with six 32 GB modules
- DDR5 5600 speed transfers data at PC5-44800 bandwidth
- Registered ECC design corrects single-bit errors and buffers every slot
- 1 V operation matches the platform's memory controller specification
- 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard
Exact DDR5 192GB Kit for Supermicro H14SST-G
This 192GB kit contains six 32GB DDR5-5600 registered ECC RDIMMs built to the voltage, rank and timing the Supermicro H14SST-G memory controller expects. The modules install in the board's 288-pin slots and are recognised at full capacity and rated speed without manual tuning.
DDR5-5600 RDIMM Interface Limits
Registered DIMMs buffer the command and address bus so the memory controller can drive every populated slot at the full 5600 MT/s data rate. The 1.1V operating voltage and CL46 latency are fixed by the DDR5-5600 standard; the board cannot run these modules faster or at lower latency than the JEDEC specification allows.
Six-Module 192GB Capacity Headroom
Populating all six slots delivers 192GB of error-correcting memory for multi-socket workloads, large in-memory databases and virtualisation hosts that need maximum density per channel. The 2Rx8 organisation fills each channel completely; any configuration requiring more capacity would need a motherboard with additional memory channels or higher-density DIMMs.
Fordele
- 192 GB total capacity for large workloads with six 32 GB modules
- DDR5 5600 speed transfers data at PC5-44800 bandwidth
- Registered ECC design corrects single-bit errors and buffers every slot
- 1 V operation matches the platform's memory controller specification
- 288-pin RDIMM form factor fits the Supermicro H14SST-G motherboard
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K6 |
| Capacity | 192GB (6 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
Should I choose the 192GB kit with six 32GB modules or a different capacity for my Supermicro H14SST-G?
The 192GB kit provides six 32GB RDIMMs that match the board's 288-pin Registered DDR5 slots and 2Rx8 rank structure, allowing full population at the rated 5600 speed.
What does the DDR5 5600 (PC5-44800) rating mean once the modules are installed in the server?
The memory controller will run each DIMM at 5600 MT/s, delivering up to 44800 MB/s of theoretical bandwidth per module when all six slots are populated.
How does the 288-pin Registered ECC interface affect what the memory can do in practice?
Registered buffering reduces electrical load on the memory controller so all six slots operate at 5600 with CL46 latency, while ECC corrects single-bit errors to prevent data corruption.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



