Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 RDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 2x128GB ECC RDIMM CL46 1.1V 2Rx4 GIGABYTE MZ73-LM2

SKU CH-Q0H9-ZQZTC

256 GB kit of two 128 GB DDR5 5600 ECC registered RDIMMs at CL46 and 1.1 V, validated for the Gigabyte MZ73-LM2 motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Vis 24 flere konfigurationer
  • 256 GB capacity in a matched 2 x 128 GB kit for full server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V low voltage reduces power draw per module under full load
  • Verified fit for GIGABYTE MZ73-LM2 with 288-pin RDIMM form factor required by the board

Exact-match server kit

This NEMIX RAM kit delivers 256 GB as two 128 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency. Registered ECC architecture and 1.1 V operation meet the precise electrical and timing requirements of the GIGABYTE MZ73-LM2 motherboard for full-capacity recognition at rated speed.

DDR5 RDIMM platform limits

DDR5 registered DIMMs use a 288-pin interface that is physically and electrically incompatible with UDIMM or SODIMM slots. The registered buffer reduces electrical load on the memory controller, enabling stable operation when all supported slots are populated, while ECC corrects single-bit errors to prevent silent data corruption.

Pre-installation checklist

Verify the MZ73-LM2 manual for maximum supported capacity per slot, approved population order, and any BIOS version requirements before ordering. Confirm the system accepts 2Rx4 registered modules at 1.1 V and that the chassis provides clearance for standard-height RDIMMs. This kit is not suited for workstations or desktops that require unbuffered non-ECC memory.

Fordele

  • 256 GB capacity in a matched 2 x 128 GB kit for full server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V low voltage reduces power draw per module under full load
  • Verified fit for GIGABYTE MZ73-LM2 with 288-pin RDIMM form factor required by the board

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose the 256 GB kit or a smaller capacity for my GIGABYTE MZ73-LM2?

The 256 GB kit uses two 128 GB RDIMMs, matching the board's DDR5 5600 registered ECC requirements; select it when you need maximum capacity and have two free slots.

What does the DDR5 5600 speed mean for real-world server performance?

DDR5 5600 delivers 44800 MT/s data rate with CL46 latency at 1.1 V, giving high bandwidth for virtualisation and database workloads while registered buffering keeps all slots stable at full load.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin registered ECC form factor is required by the MZ73-LM2; UDIMM or SODIMM modules will not fit or function, so only DDR5 RDIMMs with matching rank and voltage are compatible.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.