Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (8x48GB) ECC RDIMM CL46 1.1V Supermicro H14SHM memory upgrade

SKU CH-ZE6B-TARPX

A 384 GB DDR5 ECC RDIMM kit of eight 48 GB modules running at 5600 MHz CL46 1.1 V, validated for the Supermicro H14SHM motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

Vis 24 flere konfigurationer
  • 384 GB total capacity from eight 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor verified for Supermicro H14SHM

Exact-match DDR5 ECC kit for Supermicro H14SHM

This 384GB kit contains eight 48GB DDR5 5600 RDIMMs built to the board's exact rank, voltage and timing requirements. Registered ECC architecture with CL46 latency and 1.1V operation lets every slot run fully populated at rated speed. The 288-pin modules are validated for the H14SHM memory population rules.

Suited for admins expanding a Supermicro H14SHM

Ideal for database, virtualization or HPC workloads that need the full 384GB in a single validated kit. Not for systems that require UDIMM or SODIMM form factors, non-ECC memory, lower-voltage DDR5 variants, or capacities beyond the board's supported limit.

384GB DDR5-5600 2Rx8 Registered ECC at 1.1V

This single spec — density, speed, rank, registered ECC and voltage combined — determines whether the memory controller recognises every module and runs them at 5600 MT/s. Verify the H14SHM manual for approved population order before installing.

Fordele

  • 384 GB total capacity from eight 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor verified for Supermicro H14SHM

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will the DDR5-5600 speed actually run at 5600 MT/s in my Supermicro H14SHM, or does the board downclock it?

The kit is spec-matched to the H14SHM memory controller, so the modules are recognised at their rated DDR5-5600 speed and run at full capacity without downclocking.

What does the PC5-44800 label tell me about real-world bandwidth on this platform?

PC5-44800 is the peak transfer rate for DDR5-5600; on the H14SHM the registered DIMMs sustain that bandwidth across all eight slots when fully populated.

Do the 288-pin RDIMMs fit the H14SHM slots without any adapter or bracket?

Yes, the 288-pin registered DIMM form factor is exactly what the H14SHM requires; no adapter or bracket is needed.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.