Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (2x48GB) CL46 ECC UDIMM memory upgrade

SKU CH-E8Q8-JTQJY

A 96 GB DDR5 ECC UDIMM kit in two 48 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation for Supermicro X14SAZ-F motherboards

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity with two 48 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V balances timing and power efficiency
  • 288-pin UDIMM form factor matches Supermicro X14SAZ-F motherboard requirements

Exact-fit DDR5 ECC kit for Supermicro X14SAZ-F

This 96 GB kit comprises two 48 GB unbuffered ECC UDIMMs built to the precise DDR5-5600, CL46, 1.10 V, 2Rx8 specification the motherboard expects. It is intended for system integrators and administrators who need guaranteed recognition at full capacity without manual tuning.

288-pin unbuffered ECC UDIMM form factor

The motherboard requires DDR5 ECC UDIMMs; registered DIMMs or SODIMMs will not fit or function. This kit matches the exact pin count, rank structure, voltage and timing the board's memory controller validates during POST.

96 GB total capacity across two slots

The dual-module layout populates two DIMM slots with 48 GB each, delivering high-density error-correcting memory for virtualization, database or scientific workloads. Systems needing more than 96 GB or requiring registered DIMM support cannot use this kit.

Fordele

  • 96 GB capacity with two 48 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V balances timing and power efficiency
  • 288-pin UDIMM form factor matches Supermicro X14SAZ-F motherboard requirements

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What does the 5600 MT/s rating mean once the kit is installed in a Supermicro X14SAZ-F?

The modules will run at DDR5-5600 with CL46 timings at 1.1 V, giving the board its rated transfer rate and full 96 GB capacity without manual tuning.

How does the PC5-44800 designation limit real-world throughput?

PC5-44800 is the JEDEC standard name for DDR5-5600; the memory controller cannot exceed this data rate unless overclocked, so peak bandwidth is capped at the spec value.

What physical slot and clearance do the 48 GB DIMMs need?

They require standard 288-pin DDR5 UDIMM slots and fit the X14SAZ-F DIMM layout; the modules have no heat spreader, so low-profile CPU coolers will not interfere.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.