Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB 4x64GB CL46 1.1V 2Rx4 Supermicro H14DST-F memory upgrade

SKU CH-N7TJ-TFC0H

A 256 GB registered ECC DDR5 kit with four 64 GB modules running at 5600 MHz, CL46, 1.1 V for Supermicro H14DST-F servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Vis 30 flere konfigurationer
  • 256 GB total capacity from four 64 GB modules for high-density server workloads
  • DDR5 5600 MT/s speed with CL46 latency for responsive data throughput
  • Registered ECC architecture detects and corrects single-bit errors to protect data integrity
  • 1 V operating voltage reduces power draw across fully populated slots
  • Validated for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor

Exact-match DDR5-5600 kit for Supermicro H14DST-F

This 256GB kit contains four 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 timings and 1.1V operation. It is built as a direct upgrade for the Supermicro H14DST-F motherboard so the memory controller recognises every module at its rated speed.

256GB registered ECC capacity and headroom

Four dual-rank 2Rx4 modules fill the board with registered ECC memory that offloads the controller and corrects single-bit errors on the fly. The kit runs at the full 5600 MT/s data rate while all slots remain populated, stopping silent data corruption before it reaches production workloads.

DDR5 RDIMM interface limits

The 288-pin registered form factor is mandatory for this platform; UDIMM or SODIMM modules will not fit or function. Population rules and maximum supported capacities are defined by the motherboard manual, so verify the approved DIMM order and total capacity before installation.

Fordele

  • 256 GB total capacity from four 64 GB modules for high-density server workloads
  • DDR5 5600 MT/s speed with CL46 latency for responsive data throughput
  • Registered ECC architecture detects and corrects single-bit errors to protect data integrity
  • 1 V operating voltage reduces power draw across fully populated slots
  • Validated for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will this DDR5-5600 2Rx4 registered ECC kit run at full speed alongside older DDR5 modules I keep in the Supermicro H14DST-F?

The kit is spec-matched to the H14DST-F memory controller at 5600 MT/s, 1.1 V, CL46 and 2Rx4 rank. Mixing different speeds, ranks or voltages will force the board to down-clock all DIMMs to the slowest common setting, so full rated performance is only guaranteed when every populated slot uses identical modules.

How can I confirm the 256 GB kit is recognised at full capacity and running at DDR5-5600 after installation?

Enter the BIOS and verify that all four slots show 64 GB each, total 256 GB, with the memory frequency reported as 5600 MT/s (PC5-44800) and CAS latency at CL46. The registered ECC design also logs corrected single-bit errors in the system event log, confirming ECC is active.

What ships in the box and do I need any extra parts to install the four 64 GB RDIMMs in the H14DST-F?

The package contains the four 288-pin DDR5 registered ECC DIMMs only. No heat spreaders, cables, tools or additional brackets are included or required; the modules seat directly into the motherboard's DDR5 RDIMM slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.