Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 32GB (2x16GB) CL46 1.1V Supermicro H14SSF memory upgrade

SKU CH-0EA3-9JE0F

A 32GB DDR5-5600 ECC registered RDIMM kit (2×16GB) at 1.1V CL46, validated for the Supermicro H14SSF motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Vis 24 flere konfigurationer
  • Exact-match DDR5-5600 kit runs at rated speed
  • 288-pin Registered ECC RDIMM fits Supermicro H14SSF
  • 1Rx8 rank layout enables full-capacity population
  • 10 V operation reduces power draw
  • Lifetime replacement warranty with US-based tech support

Exact-match DDR5-5600 ECC RDIMM kit

This 32GB kit contains two 16GB DDR5-5600 (PC5-44800) registered ECC RDIMMs built to the precise 1Rx8 rank, 1.10V voltage and CL46 timing that the Supermicro H14SSF motherboard expects. The modules are recognised at full capacity and run at their rated speed without manual tuning.

Suited for single-socket Supermicro H14SSF servers

Administrators populating the H14SSF with registered ECC memory that matches the board's population rules will find this kit plug-and-play. Builders needing unbuffered UDIMMs, SODIMMs, higher frequencies, lower latencies or larger per-module capacities should look elsewhere.

Handles typical enterprise workloads with headroom

Two 16GB ranks give 32GB of registered ECC capacity, enough for virtualisation hosts, database nodes and compute tasks that benefit from error correction. Workloads demanding more than 32GB per channel or speeds above DDR5-5600 will exceed this kit's limits.

Fordele

  • Exact-match DDR5-5600 kit runs at rated speed
  • 288-pin Registered ECC RDIMM fits Supermicro H14SSF
  • 1Rx8 rank layout enables full-capacity population
  • 10 V operation reduces power draw
  • Lifetime replacement warranty with US-based tech support

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the Supermicro H14SSF motherboard need any specific DIMM population order for this 2 x 16 GB DDR5 5600 CL46 RDIMM kit?

The H14SSF manual defines the exact slot sequence for registered DIMMs. Follow that order so both 16 GB modules are recognised at full 5600 MT/s with CL46 timing.

Can I keep existing DDR5 4800 RDIMMs installed while adding this 5600 CL46 kit?

Mixing speeds forces all channels to the lowest common rate, so the 5600 kit would drop to 4800. For full rated performance populate only matching 5600 modules.

How do I confirm the kit is running at DDR5 5600 with ECC active after installation?

Enter the H14SSF BIOS and check the memory information screen: it should show 32 GB total, 5600 MT/s, CL46, 1.10 V and ECC enabled.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.