Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Six green DDR5 RDIMM modules without heat spreaders, 288-pin, 576GB kit

NEMIX RAM

NEMIX RAM DDR5 576GB (6x96GB) 4800 CL40 1.1V ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-4YGV-SHFMC

A 576GB kit of six 96GB DDR5 4800 CL40 1.1V ECC registered RDIMMs validated for the Supermicro H14DST-FL motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Vis 30 flere konfigurationer
  • Massive 576 GB capacity across six 96 GB modules
  • DDR5 4800 speed with CL40 latency for responsive throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation reduces power draw under full load
  • Verified fit for Supermicro H14DST-FL with 288-pin RDIMM form factor

Exact-match DDR5 RDIMM kit for Supermicro H14DST-FL

This 576GB kit contains six 96GB DDR5 4800 ECC Registered DIMMs built to the 2Rx4 1.1V CL40 specification the Supermicro H14DST-FL memory controller expects. It targets server administrators who need maximum capacity across all populated slots without down-clocking. Buyers who need a different capacity, a UDIMM form factor, or non-ECC modules should look elsewhere.

Verify motherboard population rules before ordering

The H14DST-FL has specific DIMM-slot population sequences and maximum-capacity-per-channel limits that must be followed for the kit to be recognised at full speed. Consult the board manual for the approved installation order, supported ranks per channel, and any BIOS version requirements. Skipping this step can leave slots unrecognised or force reduced frequencies.

Registered ECC design runs at rated voltage

Each module operates at 1.1V and relies on the server chassis airflow for cooling; the registered architecture reduces electrical load on the memory controller when all six slots are filled. ECC corrects single-bit errors in real time to prevent silent data corruption. Acoustic output is dictated by the system fans, not the memory itself.

Fordele

  • Massive 576 GB capacity across six 96 GB modules
  • DDR5 4800 speed with CL40 latency for responsive throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation reduces power draw under full load
  • Verified fit for Supermicro H14DST-FL with 288-pin RDIMM form factor

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What does the 576GB kit contain and is anything else required for installation?

The kit includes six 96GB DDR5 4800 CL40 1.1V ECC Registered RDIMM modules in a 288-pin form factor. No additional parts are needed if your Supermicro H14DST-FL motherboard has six free DIMM slots and the manual confirms this population.

How do I know this 6x96GB configuration is the right one for my H14DST-FL?

The kit matches the board's required DDR5 4800 (PC5-38400) 2Rx4 Registered ECC specification at 1.1V CL40. Verify your motherboard manual for supported capacity per slot and the approved DIMM population order before installing.

What does the 4800 CL40 rating mean when the modules are running in the server?

The memory will operate at DDR5 4800 MT/s with a CAS latency of 40 cycles at 1.1V. Registered buffering and ECC let all six slots run fully populated at this rated speed while correcting single-bit errors automatically.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.