NEMIX RAM
NEMIX RAM DDR5 6400 576GB (6×96GB) CL52 2Rx4 1.1V ECC RDIMM 288-pin Supermicro H14DSH
A 576 GB DDR5-6400 registered ECC memory kit in six 96 GB modules at 1.1 V CL52, validated for the Supermicro H14DSH motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Massive 576 GB capacity from six 96 GB modules
- DDR5 6400 speed with CL52 latency for high throughput
- 1 V operation reduces server power draw
- Registered ECC RDIMM prevents silent data corruption
- Verified compatibility with Supermicro H14DSH motherboard
Exact-match DDR5 RDIMM kit for Supermicro H14DSH
This 576GB kit delivers six 96GB DDR5-6400 Registered ECC modules built to the memory controller's precise rank, voltage and timing requirements. It targets administrators who need the full capacity recognised at rated speed without manual tuning. Systems requiring UDIMM or SODIMM form factors cannot use this registered 288-pin design.
Thermals noise and power draw in normal use
Operating at 1.1V, the modules draw minimal power and run without heat spreaders, relying on chassis airflow for passive cooling. Registered buffering reduces electrical load on the memory controller, contributing to lower overall system power during typical server workloads. No active cooling components are present to generate noise.
Behaviour under sustained load
ECC corrects single-bit errors on the fly, preventing silent data corruption during extended compute jobs. The registered architecture maintains signal integrity across all six slots when fully populated at DDR5-6400 speeds. Stability depends on following the motherboard's validated population order and capacity limits.
Fordele
- Massive 576 GB capacity from six 96 GB modules
- DDR5 6400 speed with CL52 latency for high throughput
- 1 V operation reduces server power draw
- Registered ECC RDIMM prevents silent data corruption
- Verified compatibility with Supermicro H14DSH motherboard
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørgsmål om denne vare
How do I install the six 96GB DDR5 RDIMMs in the Supermicro H14DSH and which population rule is most often missed?
Populate all twelve slots in the order the H14DSH manual specifies — typically one DIMM per channel per CPU first — so the registered 2Rx4 modules initialise at the rated 6400 speed; skipping the per-channel sequence is the step that causes partial detection.
What maintenance or replacement will the 576GB kit need during its service life?
The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; only a failed DIMM would need replacement under the lifetime warranty.
What limit appears first when the 2Rx4 registered ECC memory runs sustained workloads at 1.1V?
The memory controller’s maximum supported capacity per socket is reached before any thermal or voltage ceiling, so full 576GB operation depends on the H14DSH’s documented population limits.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



