NEMIX RAM MD25600-618K2 32GB (2x16GB) DDR4-3200 CL22 1.2V UDIMM memory upgrade

Targeted DDR4-3200 upgrade for ASUS Pro Q670M-CE

This 32 GB kit delivers two 16 GB DDR4-3200 UDIMMs rated at CL22 and 1.20 V. It matches the exact rank, voltage and timing the ASUS Pro Q670M-CE D4-CSM motherboard expects, so the system recognises the full capacity at its rated speed without manual tuning. The modules use major OEM chips from Samsung, Micron or Hynix and are tested for stability at the specified frequency. Builders needing ECC or registered memory should look elsewhere, as this kit is strictly non-ECC unbuffered.

288-pin unbuffered form factor with no heat spreader

Each stick uses the standard 288-pin DDR4 UDIMM layout required by the board, ensuring a direct fit into the desktop DIMM slots. The absence of a heat spreader keeps the module height low, which helps when clearance around large CPU coolers is tight. Gold-edge contacts are factory tested for reliable seating, and the 1Rx8 organisation follows the population rules documented for this platform. No additional power connectors or software configuration are required beyond normal BIOS detection.

Verify DIMM population order

Consult the ASUS Pro Q670M-CE D4-CSM manual for the approved slot sequence and the highest supported memory density per slot. The board may require modules to be installed in a specific pair of slots to run at 3200 MT/s, and total system capacity limits vary by BIOS revision. Confirm that your current BIOS version supports 32 GB kits at this speed and timing. If the manual lists different voltage or rank requirements, those take precedence over this kit's specifications.