Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 70mm square CPU cooler fan with 3-pin connector

OEM Industries

OEM Industries F7015B12HB 70mm 12V .3A 3-pin CPU cooler

SKU CH-QPXH-Z885Z

70 mm square CPU cooler with a 12 V ball-bearing fan drawing 0.3 A on a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 70 mm fan fits tight CPU clearance
  • Ball bearing reduces friction for longer service life
  • 12 V .3 A draw keeps power use low
  • 3-pin connector enables motherboard speed control
  • 15 mm slim profile suits low-profile builds

Compact 70 mm square cooler

The OEM Industries F7015B12HB is a 70 mm square frame cooler designed for tight CPU sockets and small-form-factor builds. It runs on 12 V at 0.3 A and uses a three-pin power connector for direct motherboard control. Buyers who need a taller heatsink or integrated heat pipes should look elsewhere.

Ball-bearing fan only

The unit ships as a fan module without extra mounting brackets, thermal compound or software. The ball bearing and 15 mm thickness aim to extend service life in continuous operation. Builders who expect a full retention kit or PWM speed control will need to source those separately.

Simple three-pin installation

Mounting relies on the board’s existing retention mechanism; align the screw holes, secure the fan, and plug the three-pin header into the CPU fan socket. Clearance around the 70 mm frame can be tight beside tall memory modules or voltage-regulator heatsinks. Systems requiring a four-pin PWM header or a larger airflow envelope will not match this cooler.

Fordele

  • 70 mm fan fits tight CPU clearance
  • Ball bearing reduces friction for longer service life
  • 12 V .3 A draw keeps power use low
  • 3-pin connector enables motherboard speed control
  • 15 mm slim profile suits low-profile builds

Specifikationer

ModelF7015B12HB
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Spørgsmål om denne vare

How often should the ball bearing fan be cleaned or replaced?

The ball bearing design resists wear better than sleeve bearings. Clean dust from the 70mm blades every 6-12 months; replacement is typically needed only if noise increases or rotation becomes uneven after several years.

What thermal limit appears first during continuous load on this 70x15mm cooler?

The 12V 0.3A motor limits maximum airflow. Under sustained load the small 7015 frame reaches its airflow ceiling before the bearing or connector becomes a bottleneck.

How loud and hot does the 3-pin fan get when running 24/7?

The 3-wire 12V 0.3A fan spins at a fixed speed. Expect a constant low hum and minimal heat from the motor itself; case airflow determines actual CPU temperature.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.