Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green 240-pin DDR3 ECC registered DIMMs, no heat spreaders

OWC

OWC 128GB (4x32GB) DDR3 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-S9K1-V8MKG

128GB kit of four 32GB DDR3-1600 CL11 ECC registered RDIMMs for Supermicro X9 series motherboards

  • Capacity128GB (4 x 32GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 128GB (4 x 32GB)

  • 128GB total capacity across four 32GB modules
  • DDR3 1600 speed with CL11 latency for server workloads
  • ECC registered design protects data integrity in workstations
  • 5V operation meets JEDEC standard for compatibility
  • Validated for Supermicro X9 series motherboards

128GB DDR3 ECC RDIMM kit

This 128GB kit contains four 32GB DDR3 1600 CL11 registered DIMMs built for Supermicro X9DAE, X9DAi, X9DBS, X9SRA and X9SRE motherboards. It targets servers and workstations that require ECC registered memory for data integrity.

Verify registered ECC support

Your board must accept 240-pin DDR3 registered ECC modules at 1.5V and support 4Rx4 density. Unbuffered consumer memory will not work in these slots and mixing registered with unbuffered types is not supported.

Replaces smaller DDR3 registered kits

The upgrade makes sense when moving from lower-capacity registered ECC sets or when populating empty slots on compatible X9-series boards. It is not suitable for desktop platforms that only accept unbuffered memory.

Fordele

  • 128GB total capacity across four 32GB modules
  • DDR3 1600 speed with CL11 latency for server workloads
  • ECC registered design protects data integrity in workstations
  • 5V operation meets JEDEC standard for compatibility
  • Validated for Supermicro X9 series motherboards

Specifikationer

BrandOWC
Part Number1R6D34R4128S
Capacity128GB (4 x 32GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DAE Series
Supermicro Motherboard X9DAi Series
Supermicro Motherboard X9DBS Series
Supermicro Motherboard X9SRA Series
Supermicro Motherboard X9SRE Series

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What is included in the box and do I need to buy anything else to install the 128GB kit?

The kit contains four 32GB DDR3 1600 CL11 ECC registered RDIMM modules. No extra parts are required if your Supermicro X9-series motherboard has four free 240-pin slots.

How do I decide between this 128GB (4x32GB) kit and a smaller capacity for my X9DAE or X9SRE board?

Choose the 128GB kit when your workload needs the maximum registered ECC capacity the board supports; select a smaller kit if you only need to fill fewer slots or want to leave room for later expansion.

What does the PC3-12800 1600MHz CL11 rating mean once the modules are running in my server?

The modules will operate at 1600MHz with a CAS latency of 11 cycles at 1.5V, delivering the standard JEDEC DDR3 bandwidth for registered ECC memory in compatible Supermicro X9 platforms.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.