Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 ECC Registered RDIMM 1Rx4 1.35V HP ProLiant BL465c G7 DL980 G7 memory upgrade

SKU CH-82B8-Z4NZT

16 GB DDR3L 1600 ECC registered RDIMM kit for HP ProLiant BL465c G7 and DL980 G7 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data errors in critical workloads
  • 16 GB kit (2 × 8 GB) expands server memory capacity
  • DDR3L 1600 MHz CL11 matches HP ProLiant BL465c G7 and DL980 G7 specs
  • Low 1.35 V DDR3L voltage reduces power draw and heat
  • Direct replacement for HP part numbers 731765B21, 731765B211 and 735302001

OWC 16GB DDR3L ECC RDIMM Kit

This 16 GB kit contains two 8 GB DDR3L 1600 registered DIMMs built for HP ProLiant BL465c G7 and DL980 G7 servers. It operates at 1.35 V with CL11 latency and includes on-die ECC for data integrity. The modules are not compatible with standard desktop systems or unbuffered memory configurations.

Registered ECC with 1Rx4 Organisation

The single specification that determines fit is the registered ECC RDIMM design with 1Rx4 rank structure. This module type is required by the target ProLiant platforms and will not work in systems that accept only unbuffered UDIMMs or a different rank layout. Mixing with non-registered memory is not supported.

Sustained Server Workload Behaviour

Under continuous load the DDR3L 1600 modules maintain JEDEC-compliant timing at 1.35 V without a heat spreader. The registered buffer reduces electrical loading on the memory controller, allowing stable operation during extended virtualization or database tasks. Error-correcting code corrects single-bit errors in real time to prevent data corruption.

Fordele

  • ECC registered design prevents data errors in critical workloads
  • 16 GB kit (2 × 8 GB) expands server memory capacity
  • DDR3L 1600 MHz CL11 matches HP ProLiant BL465c G7 and DL980 G7 specs
  • Low 1.35 V DDR3L voltage reduces power draw and heat
  • Direct replacement for HP part numbers 731765B21, 731765B211 and 735302001

Specifikationer

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant BL465c G7
HP ProLiant DL980 G7

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How does the 1600 MHz speed translate once the kit is installed in a ProLiant BL465c G7 or DL980 G7?

The modules run at DDR3L 1600 (PC3L-12800) with CL11 timing, delivering the rated throughput as long as the server's memory controller supports that frequency.

What does the 240-pin DDR3L registered ECC interface limit in practice?

The registered ECC design only works in workstation or server boards that accept 240-pin DDR3L RDIMMs; it cannot be used in standard desktop or unbuffered memory slots.

What physical clearance does the 240-pin RDIMM need to fit in the target HP servers?

Each module is a standard-height 240-pin DDR3L RDIMM without a heat spreader, so it fits the regular DIMM sockets in the BL465c G7 and DL980 G7.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.