Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR3 RDIMM modules with gold contacts and black chips, no heat spreaders

OWC

OWC 32GB (2x16GB) DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM Server RAM

SKU CH-JX1Z-WQ3GP

A 32 GB dual-channel kit of two 16 GB DDR3 1333 ECC registered RDIMMs for compatible servers and workstations

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

Rank 2Rx4

  • 32 GB kit (2 × 16 GB) doubles capacity for virtualization workloads
  • DDR3 1333 PC3-10600 CL9 matches server board specs for stable throughput
  • ECC registered RDIMM corrects single-bit errors to protect data integrity
  • 5 V JEDEC standard voltage keeps power draw predictable in dense racks
  • 240-pin 2Rx4 dual-rank layout fits registered DIMM slots without mixing issues

Server memory kit for registered ECC platforms

This 32 GB kit contains two 16 GB DDR3 1333 modules built to PC3-10600 CL9 timings at 1.5 V. It is designed for workstations and servers that require registered ECC RDIMM modules and will not operate in standard desktop systems or alongside unbuffered memory.

240-pin registered DIMMs with dual-rank layout

Each module uses a 2Rx4 organisation and fits the standard 240-pin DDR3 socket. The registered buffer reduces electrical load on the memory controller, allowing stable operation in multi-DIMM server configurations. No heat spreader is fitted, so airflow in the chassis must be sufficient for the bare PCB.

JEDEC and RoHS compliant dual-channel kit

The pair is tested together for matched performance and carries JEDEC and RoHS compliance markings. OWC supplies a limited lifetime warranty with an advanced replacement programme and free technical support, so a failed module can be swapped without returning the original first.

Fordele

  • 32 GB kit (2 × 16 GB) doubles capacity for virtualization workloads
  • DDR3 1333 PC3-10600 CL9 matches server board specs for stable throughput
  • ECC registered RDIMM corrects single-bit errors to protect data integrity
  • 5 V JEDEC standard voltage keeps power draw predictable in dense racks
  • 240-pin 2Rx4 dual-rank layout fits registered DIMM slots without mixing issues

Specifikationer

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What speed does the DDR3 1333 PC3-10600 interface cap at in practice?

The modules run at 1333 MT/s with CL9 latency, which is the JEDEC-standard ceiling for DDR3-1333 registered DIMMs.

What physical slot and clearance do these 240-pin RDIMMs need?

They require a 240-pin DDR3 RDIMM socket; the sticks have no heat spreader, so they fit in standard-height server DIMM slots without extra clearance.

How are the two 16 GB sticks installed for dual-channel operation, and what step is often missed?

Populate the two sticks in the matched-channel slots specified by the server manual, then verify in BIOS that ECC and registered mode are both enabled.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.