Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 32GB (2x16GB) DDR5 4800 CL40 ECC RDIMM Kit for HP ProLiant Gen11

SKU CH-PMFG-A3CTZ

A 32 GB DDR5 ECC registered DIMM kit running at 4800 MHz CL40 for HP ProLiant Gen11 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in critical workloads
  • 32 GB dual-channel kit expands server memory capacity
  • DDR5 4800 speed with CL40 latency accelerates throughput
  • 1 V low-voltage operation reduces power draw per module
  • Validated for HP ProLiant DL320 Gen11, DL380a Gen11 and DX320 Gen11

Target Server Memory Upgrade

This 32GB kit contains two 16GB DDR5 4800 ECC Registered DIMMs built for HP ProLiant DL320 Gen11, DL380a Gen11 and DX320 Gen11 servers. It runs at 1.1V with CL40 latency and a 1Rx8 organisation, delivering error-correcting registered memory for workloads that require data integrity.

Replacing Unbuffered or Mixed Modules

The kit replaces non-ECC unbuffered DIMMs or mismatched registered sets that cannot operate in these Gen11 platforms. The jump is worth it when the system demands JEDEC-standard registered ECC memory and the existing slots are populated with incompatible module types.

Sustained Load Behaviour

Under continuous operation the registered buffer reduces electrical loading on the memory controller, allowing stable throughput at the rated 4800 MT/s without the signal degradation seen in unbuffered configurations. The absence of a heat spreader means airflow across the 288-pin modules must be maintained by the server chassis cooling design.

Fordele

  • ECC registered design protects data integrity in critical workloads
  • 32 GB dual-channel kit expands server memory capacity
  • DDR5 4800 speed with CL40 latency accelerates throughput
  • 1 V low-voltage operation reduces power draw per module
  • Validated for HP ProLiant DL320 Gen11, DL380a Gen11 and DX320 Gen11

Specifikationer

BrandOWC
Part Number4R8D51R8032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProLiant DL320 Gen11
HP ProLiant DL380a Gen11
HP ProLiant DX320 Gen11

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will these 288-pin DDR5 RDIMMs fit the DIMM slots on an HP ProLiant DL380a Gen11?

Yes, the kit is a 288-pin DDR5 ECC registered DIMM designed for HP ProLiant DL320 Gen11, DL380a Gen11 and DX320 Gen11 servers.

What is the correct way to install the two 16 GB modules, and which step do people often miss?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16 GB modules are detected at 4800 MT/s.

When will the ECC registered memory need replacement or maintenance?

DDR5 ECC registered modules have no scheduled maintenance; replace only if system logs report uncorrectable errors or if a capacity upgrade is required later.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.