Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR3L ECC RDIMM sticks in static bags

OWC

OWC 32GB (4x8GB) DDR3L 1600 ECC RDIMM 1Rx4 Supermicro 1027/2027

SKU CH-WQXP-XAAXS

32GB kit of four 8GB DDR3L 1600 ECC registered DIMMs for Supermicro 1027 and 2027 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

De overstregede versioner findes, men er ikke på lager her.

  • ECC registered design protects data integrity in servers
  • 32GB kit with four 8GB modules expands capacity
  • DDR3L 1600 CL11 matches Supermicro 1027 and 2027 specs
  • 35V DDR3L lowers power draw versus standard DDR3
  • 240-pin RDIMM form factor fits approved SuperServer slots

OWC DDR3L 1600 ECC RDIMM kit

This OWC kit provides 32GB of DDR3L 1600 registered ECC memory in four 8GB modules. It is built for Supermicro SuperServer 1027 and 2027 series systems that require registered DIMMs. Workstations and servers needing error-correcting registered memory are the intended audience. Standard desktop computers cannot use these modules.

240-pin 1.35V registered design

Each module uses a 240-pin DDR3L form factor and operates at 1.35V without a heat spreader. The registered buffer reduces electrical load on the server memory controller. Mixing these registered DIMMs with unbuffered memory is not supported and will prevent the system from booting.

DDR3L platform limits

The DDR3L 1600 interface caps bandwidth at the PC3L-12800 data rate with CL11 latency. Older SuperServer platforms cannot exceed this speed or use later DDR generations. Buyers who need higher memory throughput or newer memory technology must choose a different server platform.

Fordele

  • ECC registered design protects data integrity in servers
  • 32GB kit with four 8GB modules expands capacity
  • DDR3L 1600 CL11 matches Supermicro 1027 and 2027 specs
  • 35V DDR3L lowers power draw versus standard DDR3
  • 240-pin RDIMM form factor fits approved SuperServer slots

Specifikationer

BrandOWC
Part Number1R6T31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1027B Series
Supermicro SuperServer 1027GR Series
Supermicro SuperServer 1027R Series
Supermicro SuperServer 1027TR Series
Supermicro SuperServer 2027GR Series

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the PC3L-12800 rating cap real-world speed at 1600 MT/s?

Yes, the PC3L-12800 specification defines a maximum data rate of 1600 MT/s for these DDR3L modules.

Will the 240-pin registered DIMMs fit the Supermicro 1027 and 2027 series slots?

The 240-pin DDR3L RDIMM form factor matches the memory slots on Supermicro SuperServer 1027B, 1027GR, 1027R, 1027TR and 2027GR systems.

What is the correct order to install the four 1Rx4 modules?

Populate the slots following the Supermicro server's channel layout, typically starting with the first slot of each channel, and ensure the registered DIMMs are fully seated before powering on.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.