Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1600 PC3-12800 CL11 1Rx8 240-pin 1.5V HP ProDesk 400 G1 G2 405 490 Tower SFF memory upgrade

SKU CH-BJ8G-F6P8M

A 4 GB DDR3 1600 module for HP ProDesk 400 G1, 400 G2, 405 G1 and 490 G1 towers

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boosts PC responsiveness with 4GB DDR3 1600 memory
  • JEDEC-standard 1.5V module ensures warranty-safe upgrade
  • CL11 timing optimises multitasking across HP ProDesk towers
  • Single 1Rx8 rank 240-pin DIMM simplifies DIY installation
  • Tested to exceed OEM specs for HP ProDesk 400 G1 G2 405 490

HP ProDesk DDR3 Upgrade

This OWC module adds 4 GB of DDR3 1600 memory to compatible HP ProDesk 400 G1 SFF, 400 G1 Tower, 400 G2 Tower, 405 G1 Tower and 490 G1 Tower systems. It is a 240-pin non-ECC unbuffered DIMM rated at 1.5 V with CL11 latency. The single-rank 1Rx8 design installs in a standard desktop DIMM slot.

Office and home PC owners

The upgrade suits users who want a straightforward capacity increase for everyday multitasking on the listed ProDesk models. Buyers whose systems require ECC, registered DIMMs or a different pin count cannot use this module. Those needing more than 4 GB per slot should consider higher-capacity alternatives.

DDR3 1600 CL11 1.5 V specification

The decisive specification is the DDR3 1600 (PC3-12800) CL11 1.5 V unbuffered non-ECC standard. Only systems designed for this exact voltage, speed and timing will operate correctly with the module. Verifying the motherboard supports DDR3 1600 at 1.5 V ensures compatibility.

Fordele

  • Boosts PC responsiveness with 4GB DDR3 1600 memory
  • JEDEC-standard 1.5V module ensures warranty-safe upgrade
  • CL11 timing optimises multitasking across HP ProDesk towers
  • Single 1Rx8 rank 240-pin DIMM simplifies DIY installation
  • Tested to exceed OEM specs for HP ProDesk 400 G1 G2 405 490

Specifikationer

BrandOWC
Part Number1U6D31R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G1 SFF
HP ProDesk 400 G1 Tower
HP ProDesk 400 G2 Tower
HP ProDesk 405 G1 Tower
HP ProDesk 490 G1 Tower

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What real-world difference will 1600 MHz DDR3 make in my ProDesk?

The 1600 MHz DDR3 module runs at PC3-12800 with CL11 latency, so the system can move data between CPU and memory at the full JEDEC-rated throughput for this platform, improving multitasking and large-file handling.

Does the 240-pin DDR3 interface limit the speed or capacity I can use?

The 240-pin DDR3 UDIMM slot caps the bus at the module's rated 1600 MHz and 1.5 V; the board cannot run faster DDR3 or any later generation, and each slot accepts one unbuffered non-ECC DIMM.

Will this stick fit the small-form-factor ProDesk 400 G1 SFF?

Yes, the standard-height 240-pin DIMM is the exact form factor used in the ProDesk 400 G1 SFF, 400 G1 Tower, 400 G2 Tower, 405 G1 Tower and 490 G1 Tower.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.