Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

OWC

OWC 64GB DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM 4x16GB memory upgrade

SKU CH-PJFZ-G9JSE

64 GB DDR3 ECC registered kit (four 16 GB modules) at 1333 MHz CL9 for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi server motherboards

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • 64GB total capacity from four 16GB modules
  • DDR3 1333MHz CL9 speed for server workloads
  • ECC Registered design prevents data corruption
  • 5V operation matches Supermicro X8DT series specs
  • 240-pin RDIMM form factor fits workstation and server boards

Server ECC Registered Kit

This 64GB kit contains four 16GB DDR3 ECC Registered RDIMM modules built for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi series motherboards. It is intended for workstation, server, NAS or router platforms that require registered memory with error correction. Standard desktop boards cannot use this kit.

Sustained 1333MHz Stability

Each module runs at PC3-10600 1333MHz CL9 with a 1.5V supply and 2Rx4 organisation. Registered buffering reduces electrical load on the memory controller, allowing all four DIMMs to maintain rated speed during continuous multi-threaded workloads without the timing drift seen on unbuffered configurations.

Keyed 240-Pin Installation

The 240-pin DDR3 key prevents insertion into incompatible slots, and the lack of a heat spreader keeps module height low for dense server chassis. Mixing these registered DIMMs with unbuffered memory will prevent boot, so all slots must be populated with identical registered modules.

Fordele

  • 64GB total capacity from four 16GB modules
  • DDR3 1333MHz CL9 speed for server workloads
  • ECC Registered design prevents data corruption
  • 5V operation matches Supermicro X8DT series specs
  • 240-pin RDIMM form factor fits workstation and server boards

Specifikationer

BrandOWC
Part Number1R3D32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DT6 Series
Supermicro Motherboard X8DTE Series
Supermicro Motherboard X8DTG Series
Supermicro Motherboard X8DTH Series
Supermicro Motherboard X8DTi Series

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How much power does the 1.5V DDR3 1333 RDIMM kit draw under continuous server load?

Each 16GB module operates at 1.5V; total system draw depends on the Supermicro motherboard's memory controller and the number of populated DIMM slots.

What motherboard and CPU combination is required to run this 4x16GB ECC registered kit?

A Supermicro X8DT6, X8DTE, X8DTG, X8DTH or X8DTi series motherboard with a CPU that supports DDR3 1333 registered ECC memory.

Can I add these CL9 2Rx4 modules alongside existing unbuffered DDR3 DIMMs in the same Supermicro board?

No; registered ECC RDIMMs cannot be mixed with unbuffered memory on the same platform.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.