Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

OWC

OWC 8GB DDR4 3200 CL22 SODIMM for Dell OptiPlex 5080 5090 5400 5480 5490

SKU CH-6QST-FSEKQ

8GB DDR4 3200 CL22 SODIMM upgrade for Dell OptiPlex 5080, 5090, 5400, 5480 and 5490 systems

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • Boost responsiveness with 8 GB DDR4 3200 CL22 memory
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Low 1.2 V operation reduces power draw and heat
  • Validated for OptiPlex 5080 5090 5400 5480 5490 systems
  • Simple DIY install with 260-pin SODIMM form factor

OWC 8GB DDR4 3200 SODIMM for OptiPlex

This OWC module is an 8GB DDR4 3200 CL22 SODIMM built for specific Dell OptiPlex desktops and all-in-ones. It runs at 1.2V with a 260-pin unbuffered non-ECC design that matches the JEDEC PC4-25600 standard.

Suits OptiPlex Micro and AIO owners.

The memory is validated for OptiPlex 5080 Micro, 5090 Micro, 5400 AIO, 5480 AIO and 5490 AIO. Buyers with different Dell models or other brands should verify their platform requires this exact specification before purchasing.

8GB single-module capacity

The kit provides one 8GB rank 1Rx8 stick. If your chassis has only one slot or you need a larger total, check the maximum supported memory for your specific OptiPlex model.

Fordele

  • Boost responsiveness with 8 GB DDR4 3200 CL22 memory
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Low 1.2 V operation reduces power draw and heat
  • Validated for OptiPlex 5080 5090 5400 5480 5490 systems
  • Simple DIY install with 260-pin SODIMM form factor

Specifikationer

BrandOWC
Part Number3S2D41R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 5080 Micro
Dell OptiPlex 5090 Micro
Dell OptiPlex 5400 AIO
Dell OptiPlex 5480 AIO
Dell OptiPlex 5490 AIO

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Does the 1.2 V DDR4 3200 CL22 SODIMM generate noticeable heat when the OptiPlex 5490 AIO runs all day?

The module operates at the standard 1.2 V JEDEC voltage and has no heat spreader; typical SODIMM power draw at this speed is low enough that case airflow in the OptiPlex 5490 AIO keeps temperatures normal during continuous use.

Must the OptiPlex 5080 Micro already have a free 260-pin DDR4 slot for this 8 GB 1Rx8 stick to work?

Yes — the upgrade requires an empty 260-pin DDR4 SODIMM socket; the OptiPlex 5080 Micro ships with one or two such slots depending on configuration, so verify an open slot before purchase.

Will this PC4-25600 CL22 module run alongside the original DDR4 memory in an OptiPlex 5480 AIO?

The stick meets JEDEC DDR4 3200 specifications; when mixed with existing DDR4 modules the system will run all memory at the lowest common speed and timing, so it will function but may downclock.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.