Raidmax
Raidmax NV-A120R3 RGB 3×120mm case fan 20-25 dBA 30-35 CFM
Three 120 mm RGB PWM fans move 30-35 CFM at 20-25 dBA for quiet, colourful case cooling
- TypeCase Fan
- Fan Size120mm
- RPM<1600 RPM
- Air Flow30-35 CFM
- Noise Level20 - 25 dBA
- Power Connector6 pin
Option 3 Packs
- 3 Packs
- 5 Packs
- Quiet operation at 20 to 25 dBA noise level
- Three 120mm fans deliver 30 to 35 CFM airflow
- RGB lighting with gradient, flash and breathing effects
- PWM control keeps speed below 1600 RPM
- Six-pin connector powers both fan and lighting
Three-pack 120 mm RGB fan kit
The Raidmax NV-A120R3 ships as a set of three 120 mm case fans with multicolour RGB LEDs. Each unit spins below 1600 RPM while moving 30 to 35 CFM of air at a noise level of 20 to 25 dBA. The fans connect through a six-pin power connector and target builders who want coordinated lighting and airflow in one package.
Build integration and airflow role
Three identical fans simplify intake or exhaust planning across front, top or rear mounts without mixing fan curves. The six-pin connector feeds both PWM control and RGB power from a single header, reducing cable count behind the motherboard tray. Users who prefer software-only lighting control should verify their board supports the six-pin RGB protocol before purchase.
Upgrade context and value threshold
The kit replaces single non-RGB fans or mismatched coolers that leave gaps in both airflow symmetry and lighting zones. The jump makes sense when a case has three 120 mm mounts and the builder wants uniform PWM behaviour plus multicolour effects such as gradient, flashing and breathing modes. It does not suit radiators demanding higher static pressure or systems limited to four-pin fan headers.
Fordele
- Quiet operation at 20 to 25 dBA noise level
- Three 120mm fans deliver 30 to 35 CFM airflow
- RGB lighting with gradient, flash and breathing effects
- PWM control keeps speed below 1600 RPM
- Six-pin connector powers both fan and lighting
Specifikationer
| Brand | Raidmax |
|---|---|
| Type | Case Fan |
| Fan Size | 120mm |
| RPM | <1600 RPM |
| Air Flow | 30-35 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 6 pin |
| Color | Multicolor |
| LED | RGB |
Andre versioner af denne model
1 flere i samme serie
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
Spørgsmål om denne vare
Will the 20-25 dBA noise level stay that quiet when the fan spins at 1600 RPM for hours?
Yes, the 20-25 dBA rating is measured at the maximum 1600 RPM, so sustained full-speed operation remains within that range.
What happens to heat output and power draw if all three fans run at 1600 RPM continuously?
Each fan uses a 6-pin connector; total power draw depends on your motherboard or controller rating, and the 30-35 CFM airflow per fan is maintained at full speed.
My motherboard only has 4-pin PWM headers — can I still control these 6-pin RGB fans?
These fans use a 6-pin connector, so you need a motherboard with matching 6-pin headers or a separate 6-pin RGB controller to run them.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear




