Seagate
Seagate 600 Series ST240HM000 2.5" 240GB SATA internal SSD
A 2.5-inch SATA internal SSD with 240GB of MLC NAND storage, delivering up to 530 MB/s read and 440 MB/s write speeds for faster boot and application load times
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity240GB
- Memory ComponentsMLC
- InterfaceSATA III
- Fast boot and load times with up to 530 MB/s sequential read
- Responsive multitasking from up to 80,000 random read IOPS
- Durable 19 nm MLC flash rated for 73 TB total writes
- Survives drops with 1500 G shock resistance and no moving parts
- Fits thin laptops at 7.00 mm height in standard 2.5" form factor
Seagate 600 Series 240GB SATA SSD
The Seagate 600 Series ST240HM000 is a 2.5-inch internal solid state drive with a 240GB capacity. It connects through a SATA III interface and uses 19nm MLC NAND flash memory. Sequential reads reach up to 530 MB/s and writes up to 440 MB/s. Random 4KB performance is rated at 80,000 read IOPS and 70,000 write IOPS.
Suits SATA laptops and desktops needing a 240GB
This drive fits 2.5-inch SATA bays in laptops and desktops where a 240GB MLC SSD is required. The 7mm height matches standard drive caddies. Systems that need an M.2 form factor or a different capacity should consider other models.
SATA III interface with 530 MB/s sequential read
The SATA III 6Gb/s host interface delivers up to 530 MB/s sequential read speed. This single specification determines whether the drive meets the throughput needs of the target system.
Fordele
- Fast boot and load times with up to 530 MB/s sequential read
- Responsive multitasking from up to 80,000 random read IOPS
- Durable 19 nm MLC flash rated for 73 TB total writes
- Survives drops with 1500 G shock resistance and no moving parts
- Fits thin laptops at 7.00 mm height in standard 2.5" form factor
Specifikationer
| Brand | Seagate |
|---|---|
| Series | 600 Series |
| Model | ST240HM000 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 240GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 530 MB/s |
| Max Sequential Write | Up to 440 MB/s |
| 4KB Random Read | Up to 80,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Features | Multi-Level Cell (19nm MLC) NAND Flash storage. Serial ATA 3.1 Host Interface (SATA 6Gb/s). High instantaneous (burst) data-transfer rates (up to 530MB/s). Parallel flash access channels. State-of-the-art on-the-fly error-correction algorithms. Native Command Queueing with command ordering to increase performance in demanding applications. Highly integrated hardware functions. Data Set Management with Trim Support. Silent operation. SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns. Support for S.M.A.R.T. drive monitoring and reporting. |
| Operating Temperature | 0°C ~ +70°C |
| Operating Humidity | 5% to 95% RH |
| Max Shock Resistance | 1500G |
| Height | 7.00mm |
| Width | 70.1mm |
| Depth | 100.45mm |
| Weight | 77g |
| Forsendelsesvægt | 0.02 kg |
| Pakkestørrelse | 109 × 85 × 10 mm |
Spørgsmål om denne vare
How fast will the 530 MB/s sequential read feel when the drive is installed in a laptop?
The 530 MB/s read speed lets the operating system and large files load noticeably quicker than a mechanical drive, cutting boot and application launch times in typical use.
What does the SATA III 6 Gb/s interface limit in everyday operation?
The SATA III link caps maximum throughput at 6 Gb/s, so sustained transfers cannot exceed the drive's rated 530 MB/s read and 440 MB/s write even if the controller could go faster.
Will the 7 mm height fit a standard 2.5 inch bay in my notebook?
Yes, the 7.00 mm profile matches the common 2.5 inch laptop bay, and the 70.1 mm by 100.45 mm footprint aligns with standard mounting points.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
