Seagate
Seagate BarraCuda 7200.10 ST3400620AS 400GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" internal hard drive
A 400 GB desktop hard drive spinning at 7200 RPM with 16 MB cache and SATA 3.0 Gb/s interface for reliable internal storage
- PackagingBare Drive
- InterfaceSATA 3.0Gb/s
- Capacity400GB
- RPM7200 RPM
- Cache16MB
- Average Seek Time8.5ms
- 400 GB capacity stores large media libraries
- 7200 RPM spindle speed speeds up file access
- 16 MB cache buffer smooths burst transfers
- SATA 3.0 Gb/s interface fits standard desktop boards
- Perpendicular recording technology boosts areal density and reliability
Capacity and interface
The Seagate BarraCuda 7200.10 ST3400620AS is a 400GB 3.5" internal hard drive with a SATA 3.0Gb/s interface. It suits desktop builders who need a new drive for an older SATA system or a secondary storage volume.
Sustained workload behaviour
The drive spins at 7200 RPM with a 16MB cache, yielding an 8.5ms average seek time and a 10ms average write time. Perpendicular recording technology supports consistent throughput during extended file transfers rather than only in short bursts.
Build quality and daily implications
Enhanced G-Force Protection guards against handling damage while Clean Sweep calibration and Directed Offline scan diagnostics maintain data integrity. The bare-drive packaging means mounting screws and cables must be supplied separately.
Fordele
- 400 GB capacity stores large media libraries
- 7200 RPM spindle speed speeds up file access
- 16 MB cache buffer smooths burst transfers
- SATA 3.0 Gb/s interface fits standard desktop boards
- Perpendicular recording technology boosts areal density and reliability
Specifikationer
| Brand | Seagate |
|---|---|
| Series | BarraCuda 7200.10 |
| Model | ST3400620AS |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 400GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.5ms |
| Average Write Time | 10ms |
| Average Latency | 4.16ms |
| Features | Perpendicular recording technology for maximum drive capacity and reliability Ultra-fast performance Superb reliability Whisper-quiet operation Enhanced G-Force Protection against handling damage Clean Sweep calibration and Directed Offline scan diagnostics RoHS (restriction of hazardous substances) compliant |
| Form Factor | 3.5" |
| Forsendelsesvægt | 0.68 kg |
| Pakkestørrelse | 203 × 152 × 51 mm |
Spørgsmål om denne vare
How much noise and heat does the 7200 RPM mechanism produce during continuous operation?
The drive is described as whisper-quiet and uses perpendicular recording technology, which reduces mechanical chatter while the 7200 RPM spindle runs at a steady speed.
What cables and host interface are required to connect the SATA 3.0Gb/s interface?
You need a standard SATA data cable and a SATA power connector from the power supply; the drive plugs directly into any motherboard or controller with a SATA 3.0Gb/s port.
Will the 3.5 inch form factor and SATA interface work alongside an older IDE drive on the same system?
Yes, the 3.5 inch drive uses a native SATA 3.0Gb/s interface, so it can coexist with legacy IDE devices on a motherboard that provides both SATA and IDE connectors.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
