Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Seagate

Seagate ST28000NT000 internal hard drive

SKU CH-XNM7-H9TZ5 MPN ST28000NT000

A 28 TB, 7200 RPM desktop hard drive with 512 MB cache and CMR technology built for 24×7 NAS RAID workloads

  • InterfaceSATA 6.0Gb/s
  • Capacity28TB
  • Recording TechnologyCMR
  • RPM7200 RPM
  • Cache512MB
  • FeaturesOptimized for NAS with AgileArray™ AgileArray enables dual-p

Options 28TB

  • 28 TB capacity stores massive media libraries and AI datasets
  • 7200 RPM with 512 MB cache delivers responsive multi-user RAID performance
  • CMR recording technology ensures consistent write speeds for 24×7 NAS workloads
  • IronWolf Health Management monitors drive condition to protect data integrity
  • 95 % data-recovery success rate from included Rescue services reduces downtime risk

28 TB CMR NAS drive

The Seagate IronWolf Pro ST28000NT000 is a 28 TB internal hard drive built for 24×7 operation in multi-bay commercial and enterprise NAS systems. It uses CMR recording technology at 7200 RPM with a 512 MB cache to deliver sustained performance under RAID workloads. Media professionals, SMBs and teams running on-prem AI model training gain massive capacity without compromising reliability.

Standard 3.5-inch SATA installation

The drive fits a standard 3.5-inch bay and connects through a SATA 6.0 Gb/s interface with no special cables or adapters required. AgileArray firmware handles dual-plane balancing and time-limited error recovery automatically, reducing the RAID rebuild issues that often appear with desktop drives in multi-bay enclosures. Physical dimensions are 146.99 mm long, 101.85 mm wide and 26.11 mm high.

Verify bay count and vendor list

Confirm that your NAS chassis has enough 3.5-inch bays and that its power supply can support the additional drive. Check the NAS vendor compatibility list for the ST28000NT000 before ordering, as approved firmware revisions vary by manufacturer. Systems limited to smaller capacities or desktop-class drives will not support this 28 TB enterprise model.

Fordele

  • 28 TB capacity stores massive media libraries and AI datasets
  • 7200 RPM with 512 MB cache delivers responsive multi-user RAID performance
  • CMR recording technology ensures consistent write speeds for 24×7 NAS workloads
  • IronWolf Health Management monitors drive condition to protect data integrity
  • 95 % data-recovery success rate from included Rescue services reduces downtime risk

Specifikationer

BrandSeagate
SeriesIronWolf Pro
ModelST28000NT000
Part NumberST28000NT000
InterfaceSATA 6.0Gb/s
Capacity28TB
Recording TechnologyCMR
RPM7200 RPM
Cache512MB
FeaturesOptimized for NAS with AgileArray™ AgileArray enables dual-plane balancing and timelimited error recovery for best-in-class RAID performance in multi-bay systems.
Always On, Always Accessible Designed for 24×7 use, allowing users to access their data any time, anywhere.
All-CMR Portfolio All IronWolf Pro drives utilize conventional magnetic recording (CMR) technology for consistent, best-in-class NAS performance.
Up to 32TB Broad range of capacity options to deliver scalable, cost-efficient storage solutions.
Built Tough 550TB/yr workload allows commercial and enterprise NAS users to
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)146.99mm
Forsendelsesvægt0.70 kg
Pakkestørrelse147 × 102 × 25 mm

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How can I confirm the 7200 RPM drive is performing correctly after installation?

Use your NAS vendor's built-in SMART monitoring or Seagate's IronWolf Health Management tool to verify drive temperature, error counts, and RAID sync status during the first 24 hours of operation.

What comes in the box and what must I purchase separately?

The drive ships in retail or OEM packaging; you will need to supply your own SATA data cable, SATA power cable, and 3.5-inch drive bay mounting screws for installation.

Which capacity version should I choose for a multi-bay NAS RAID array?

This model provides 28TB of CMR storage; select it when you need maximum raw capacity per bay for 24×7 enterprise workloads such as video production or on-prem AI model training.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.