Seagate
Seagate ST6000DM003Product BarraCuda 6TB 3.5" 5400 RPM 256MB SATA internal hard drive
A 6TB desktop hard drive with a 256MB cache and 5400 RPM spindle speed for bulk storage
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity6TB
- NAND Flash Memory TypeSLC
- RPM5400 RPM
- Cache256MB
- 6 TB capacity stores large media libraries
- 256 MB cache speeds up frequent file access
- SATA 6.0 Gb/s interface fits standard desktop bays
- 5 inch form factor matches common drive cages
- 5400 RPM spindle balances quiet operation with throughput
Capacity and interface
The Seagate BarraCuda ST6000DM003 is a 6TB 3.5-inch internal hard drive with a SATA 6.0Gb/s interface. It is built for desktop PCs, servers and storage systems that need a large volume of affordable storage. The 256MB cache helps smooth everyday read and write operations.
Sustained workload behaviour
At 5400 RPM the spindle delivers steady throughput for sequential tasks such as media libraries, backups and archival storage. Average seek time is 15ms and average latency is 6.0ms, so random access is slower than on higher-speed drives. The SLC NAND cache layer assists burst writes but does not change the sustained transfer ceiling.
Installation checks
Verify that your chassis has a free 3.5-inch bay and that your power supply provides a SATA power connector. The drive measures 1 inch high, 4 inches wide and 5.8 inches deep, and weighs approximately 1.34 lb. A SATA data cable is required and is not included in the bare-drive packaging.
Fordele
- 6 TB capacity stores large media libraries
- 256 MB cache speeds up frequent file access
- SATA 6.0 Gb/s interface fits standard desktop bays
- 5 inch form factor matches common drive cages
- 5400 RPM spindle balances quiet operation with throughput
Specifikationer
| Brand | Seagate |
|---|---|
| Series | BarraCuda |
| Model | ST6000DM003 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 6TB |
| NAND Flash Memory Type | SLC |
| RPM | 5400 RPM |
| Cache | 256MB |
| Average Seek Time | 15ms |
| Average Latency | 6.0ms |
| Form Factor | 3.5" |
Spørgsmål om denne vare
How much power and heat does the 5400 RPM ST6000DM003 produce when running continuously?
The 5400 RPM spindle speed keeps power draw and heat lower than faster drives, making it suitable for all-day operation in a desktop or storage system.
What motherboard connector and physical bay does the 3.5" SATA/600 drive need?
It requires a standard SATA data port and a 3.5-inch drive bay; the bare drive ships without cables or mounting screws.
Will the 6 TB BarraCuda work alongside an older 3 Gb/s SATA controller?
Yes, the SATA 6.0Gb/s interface is backward compatible with earlier SATA revisions, so it will run at the controller's maximum speed.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
