Seagate
Seagate ST900MM0026 900GB 10000RPM 64MB 2.5" SAS internal hard drive
A 900 GB 10000 RPM SAS drive with 64 MB cache fits 2.5 inch bays for fast server storage
- 900 GB capacity stores more data per drive
- 10 000 RPM spindle delivers faster read and write speeds
- 64 MB cache improves burst transfer performance
- 5 inch SAS form factor fits dense server bays
- Seagate PowerChoice technology reduces power consumption during idle periods
900GB 10K SAS Enterprise Drive
The Seagate ST900MM0026 is a 2.5 inch SAS hard drive built for enterprise servers and storage arrays. It delivers 900GB capacity at 10000 RPM with a 64MB cache. The drive uses a 6Gb/s SAS interface and arrives with zero power-on hours. PowerChoice technology allows T10-compliant power management tuning.
Suits High-IOPS Server Workloads
This drive fits administrators who need low-latency random access for databases, virtualization or transaction-heavy applications. The 10K spindle speed and SAS interface support dual-port redundancy and multi-path I/O. It is not suitable for systems that lack a SAS backplane or HBA. Desktop PCs and laptops without SAS controllers cannot use this device.
SAS 6Gb/s Interface Decides Fit
The single specification that determines compatibility is the 6Gb/s SAS interface. A matching SAS HBA, RAID controller or backplane is mandatory for operation. The 2.5 inch form factor fits standard enterprise drive bays and hot-swap trays. Verify the host connector and protocol before installation.
Fordele
- 900 GB capacity stores more data per drive
- 10 000 RPM spindle delivers faster read and write speeds
- 64 MB cache improves burst transfer performance
- 5 inch SAS form factor fits dense server bays
- Seagate PowerChoice technology reduces power consumption during idle periods
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
What host controller or backplane do I need for the 2.5" SAS 6Gb/s interface on this ST900MM0026 drive?
You need a SAS host bus adapter or RAID controller with a 6Gb/s SAS port, or a server backplane wired for 2.5" SAS drives.
Will the ST900MM0026 negotiate down to 3Gb/s SAS if my older controller only supports that speed?
Yes, the 6Gb/s SAS interface is backward-compatible and will link at 3Gb/s on an older controller.
How can I verify the drive is running at 10000 RPM and reporting zero power-on hours after installation?
Check SMART data with a tool such as smartctl; it will show 10000 RPM spindle speed and a power-on hours count of zero.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



