STARTECH
STARTECH SATDUP11 2.5/3.5" SATA Drive Duplicator Eraser
Standalone duplicator and eraser clones or sanitises 2.5" and 3.5" SATA drives at up to 14 GBpm without a host computer
- ColorBlack
- Size2.5" & 3.5"
- Typeothers
- MaterialAluminum
- Internal Interface2 - SATA Data & Power Combo (7+15 pin) Receptacle
- Number of Bay2
- Standalone cloning erases need for a host computer
- Sector-by-sector mode copies at up to 14 GBpm
- Sanitises two drives at once with multiple erase modes
- Meets DoD standards for secure data destruction
- Tested with 4 TB HDDs and 1 TB SSDs per bay
Standalone SATA Duplicator and Eraser
The StarTech SATDUP11 is a standalone duplicator and eraser for 2.5-inch and 3.5-inch SATA hard drives and solid-state drives. It operates without a host computer and provides three duplication modes including a sector-by-sector copy speed of up to 14 GBpm. An integrated digital LCD display shows operation status and task progress.
Suited for IT sanitisation and cloning workflows
This unit suits technicians who need to clone or sanitise SATA drives to DoD-standard erase modes without tying up a workstation. It supports two drives simultaneously in either 2.5-inch or 3.5-inch form factors. Builders who require interfaces other than SATA should look elsewhere because this duplicator only accepts SATA data and power combo receptacles.
Sector-by-sector copy speed of 14 GBpm
The single specification that decides fit is the maximum sector-by-sector duplication rate of 14 GBpm across the two internal SATA bays. Each bay has been tested with drives up to 4 TB for 3.5-inch hard drives and up to 1 TB for 2.5-inch drives. The package includes a universal AC adapter with regional cords and two SATA cables for immediate deployment.
Fordele
- Standalone cloning erases need for a host computer
- Sector-by-sector mode copies at up to 14 GBpm
- Sanitises two drives at once with multiple erase modes
- Meets DoD standards for secure data destruction
- Tested with 4 TB HDDs and 1 TB SSDs per bay
Specifikationer
| Brand | StarTech.com |
|---|---|
| Model | SATDUP11 |
| Color | Black |
| Size | 2.5" & 3.5" |
| Type | others |
| Material | Aluminum |
| Internal Interface | 2 - SATA Data & Power Combo (7+15 pin) Receptacle |
| Number of Bay | 2 |
| Maximum Capacity (per Bay) | Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay and 1TB 7200 RPM 2.5" hard drives per bay |
| Power | Power Source: AC Adapter Included Input Voltage: 100 ~ 240 AC Input Current: 1.4A Output Voltage: 12 DC Output Current: 5A Center Tip Polarity: Positive |
| Features | Three modes of hard drive duplication including Sector-by-Sector at 14 GBpm Digital LCD Display for operation and task progress Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD) Supports SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives Universal Power Adapter (NA/UK/EU) Portable light weight design TAA Compliance (Trade Agreement Act) Erase up to 2 hard drives with single-pass and multi-pass overwriting / DoD erasing |
| Dimensions | 1.20" x 5.10" x 3.10" |
| Weight | 0.79 lb. |
| Package Contents | 1 - Hard Drive Duplicator and Eraser 2 - SATA Cables 1 - Universal Power Adapter 3 - Regional Power Cords (NA/UK/EU) 2 - HDD Pad 1 - Quick Install Guide |
| Forsendelsesvægt | 1.57 kg |
| Pakkestørrelse | 269 × 185 × 127 mm |
Spørgsmål om denne vare
What SATA drives do I need to use the two internal 7+15-pin receptacles?
The duplicator accepts 2.5" or 3.5" SATA HDDs and SSDs up to 4TB for 3.5" drives and 1TB for 2.5" drives, tested at 7200 RPM.
Can I keep using my existing SATA cables with this unit?
Yes, the package includes two SATA cables for the internal bays; the unit does not require any host computer connection.
How do I verify the duplicator is copying or erasing correctly?
The built-in digital LCD display shows the active mode, progress and completion status for each operation.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
