Sudokoo
Sudokoo R-MACH120-GYWPN1-GAS 120mm 30mm case fan 500-3000 RPM
- 1 Fan
- Case Fan
22,99 US$
0.00029643BTC
På lager
Sudokoo
Sudokoo MACH120 3in1 120mm case fan 3-pack 500-3000 RPM
Three 120 mm PWM fans deliver 108 CFM airflow and 7.31 mmAq static pressure at speeds from 500 to 3000 RPM
- Fan Counts3 Fans
- Fan ControllerNo Controller
- TypeCase Fan
- Fan Size120mm
- Fan Thickness30mm
- Bearing TypeHybrid Hydraulic Bearing
Model 120mm
- 120mm
- 140mm
Option 3 Packs
- 1 Pack
- 3 Packs
- Three-pack covers a 360 mm radiator or full-tower airflow
- 500–3000 RPM PWM range scales speed to thermal load
- 108 CFM airflow with 7.31 mmAq static pressure pushes through dense fins
- Hybrid hydraulic bearing with dual oil circuits cuts friction noise below 39.9 dB
- LCP blades reinforced with 40 % glass fibre resist warping at high RPM
Three-fan pack for radiator and case cooling
The Sudokoo MACH120 3in1 ships as a trio of 120 mm fans built for radiators, full-tower airflow and custom loops. Each unit uses a 3-phase 10-pole FOC motor with a hybrid hydraulic bearing and LCP blades reinforced with 40 % glass fibre. The 30 mm thickness adds structural rigidity for high-RPM operation.
Speed range and thermal headroom
PWM control spans 500 to 3000 RPM ±10 % and can drop to 0 RPM below 5 % duty for silent idle. At full speed a single fan delivers 108 CFM airflow and 7.31 mmAq static pressure while noise stays under 39.9 dB(A). The thick frame improves cooling contact on dense radiators or filtered intakes.
4-pin PWM interface and power limits
The 4-pin PWM connector draws 12 VDC at 0.50 A for 6 W per fan. Motherboard headers typically cap at 1 A, so two fans per header is the practical limit without a splitter or hub. Three fans on one header would exceed that rating and is not supported by the supplied connectors.
Fordele
- Three-pack covers a 360 mm radiator or full-tower airflow
- 500–3000 RPM PWM range scales speed to thermal load
- 108 CFM airflow with 7.31 mmAq static pressure pushes through dense fins
- Hybrid hydraulic bearing with dual oil circuits cuts friction noise below 39.9 dB
- LCP blades reinforced with 40 % glass fibre resist warping at high RPM
Specifikationer
| Model | MACH120 3in 1 |
|---|---|
| Part Number | R-MACH120-GYWPN3-GAS |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 30mm |
| Bearing Type | Hybrid Hydraulic Bearing |
| RPM | 500~3000 RPM+-10% |
| Air Flow | 108 CFM |
| Air Pressure | 7.31 mmAq |
| Noise Level | <39.9 dB(A) |
| Power Connector | 4-pin PWM |
| Color | Black Gray |
| Dimensions | 120x120x30 mm |
| Forsendelsesvægt | 1.23 kg |
| Pakkestørrelse | 219 × 181 × 114 mm |
Andre versioner af denne model
2 flere i samme serie
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
Sudokoo
Sudokoo MACH140 US 140mm case fan 30mm 500-2200 RPM 129 CFM 5.91 mmAq
- 1 Fan
- No Controller
26,99 US$31,24 US$−14%
0.00034801BTC
På lagerSpørgsmål om denne vare
Will the 30 mm thick 120 mm fans with 4-pin PWM fit alongside an existing fan on the same radiator?
Each fan is 120x120x30 mm with a 4-pin PWM connector; the 30 mm thickness adds depth so verify your radiator and case clearance before mounting them next to any other fan.
How can I confirm the fans are running at the correct speed after installation?
With PWM control the fans spin between 500 and 3000 RPM ±10 % and can stop at 0 RPM below 5 % PWM duty; monitor RPM in BIOS or fan-control software to verify they respond to temperature curves.
What comes in the package and what must be purchased separately?
The box contains three 120 mm fans with 4-pin PWM connectors; no fan controller, mounting screws or additional cables are included.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001057BTC
På lager