SXDOOL
SXDOOL 2B06038B12S 60mm 12V 1.80A 15000 RPM PWM case fan
A 60 mm PWM case fan with double ball bearings, 12 V 1.80 A power and 15000 RPM speed for high airflow cooling
- Double ball bearings extend operating life to 10.0000 hours
- PWM intelligent control adjusts speed to 15000 RPM for thermal balance
- 12 V / 1.80 A input delivers high airflow and pressure
- 4-pin connector supports speed measurement and signal alarm
- 60 mm frame fits dense server and workstation layouts
High-Speed 60mm PWM Server Fan
The SXDOOL 2B06038B12S is a 60mm DC12V cooling fan designed for server and workstation chassis where high airflow is critical. It draws 1.80A and spins at 15000 RPM to deliver large air volume and pressure for dense component layouts. The 4-pin PWM interface enables intelligent temperature control with speed monitoring and signal alarm functions. This unit suits builders maintaining or upgrading 6038 form-factor cooling arrays.
PWM Control And Environmental Limits
The four-pin connector provides PWM speed regulation, tachometer feedback and an alarm signal for active thermal management. Operation is rated for ambient temperatures up to 25 and relative humidity between 45 and 85 percent. Performance scales with the PWM duty cycle supplied by the host board; the fan does not define its own thermal curve. Buyers needing voltage-only control or a three-pin header cannot use the full feature set.
Double Ball Bearing Construction
Maintenance-free double ball bearings support the 10.0000 hour service life rating under the specified temperature and humidity range. The 6038 frame fits standard 60mm mounting holes with 38mm depth clearance. A 4-pin plug connects directly to compatible motherboard or fan controller headers. The bearing choice reduces friction at 15000 RPM but assumes clean airflow; environments with heavy particulate ingress will degrade longevity faster than the rating suggests.
Fordele
- Double ball bearings extend operating life to 10.0000 hours
- PWM intelligent control adjusts speed to 15000 RPM for thermal balance
- 12 V / 1.80 A input delivers high airflow and pressure
- 4-pin connector supports speed measurement and signal alarm
- 60 mm frame fits dense server and workstation layouts
Specifikationer
Der er endnu ikke offentliggjort specifikationer for denne vare.
Spørgsmål om denne vare
How do I pick the right version of the 2B06038B12S fan for my build?
This model is a single 60 mm, 12 V, 1.80 A PWM fan with double ball bearings; no other capacities or versions are offered under this part number.
What does the 15000 RPM rating mean when the fan is installed in a case?
15000 RPM is the maximum speed under PWM control; actual speed varies with motherboard fan curves and thermal load, delivering high airflow and pressure when needed.
What does the 4-pin PWM interface actually control on this fan?
The 4-pin connector enables PWM speed regulation, real-time speed reporting and a signal alarm if the rotor stalls or drops below threshold.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



