Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Team Group CX2 1TB 2.5 inch SATA internal SSD in black metal casing

Team Group

Team Group CX2 1TB 2.5" SATA III Internal SSD T253X6001T0C101

SKU CH-RQ0G-VGD0H MPN T253X6001T0C101

A 2.5" SATA III internal SSD with 1TB capacity, 3D NAND, up to 540 MBps read and 490 MBps write speeds, 200 TBW endurance and shock-resistant design

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form Factor2.5"
  • Capacity1TB
  • Memory Components3D NAND
  • InterfaceSATA III

Options 1TB

  • Faster boot and load times with up to 540 MBps sequential read
  • Sustained write performance up to 490 MBps for large file transfers
  • 3D NAND with SLC caching boosts responsiveness over mechanical drives
  • Shock resistant to 1500G and vibration resistant to 20G for durability
  • ECC and wear-levelling protect data integrity and extend drive life

Ready for a 1 TB SATA upgrade

The Team Group CX2 1 TB 2.5-inch drive uses 3D NAND and a SATA III interface to replace a mechanical hard drive in a laptop or desktop. It delivers sequential reads up to 540 MBps and writes up to 490 MBps with SLC caching and no DRAM cache. The 200 TBW rating and 1 000 000 hour MTBF suit everyday consumer workloads.

SATA III practical limits

The drive runs on SATA Rev. 3.0 at 6 Gb/s and falls back to SATA Rev. 2.0 when the host only supports the older standard. Throughput cannot exceed the bus ceiling, so sustained transfers stay below the quoted 540 MBps read and 490 MBps write figures. Operating temperature is rated 0 °C to 70 °C and storage temperature -40 °C to 85 °C.

Simple 2.5-inch installation

Mount the drive in any standard 2.5-inch bay, connect the SATA data and power cables, and the system recognises it without extra drivers. Common issues are loose cables, a port limited to SATA 2.0 speeds, or forgetting to initialise the volume in the operating system. Shock resistance of 1500 G and vibration resistance of 20 G protect the drive once installed.

Fordele

  • Faster boot and load times with up to 540 MBps sequential read
  • Sustained write performance up to 490 MBps for large file transfers
  • 3D NAND with SLC caching boosts responsiveness over mechanical drives
  • Shock resistant to 1500G and vibration resistant to 20G for durability
  • ECC and wear-levelling protect data integrity and extend drive life

Specifikationer

BrandTeam Group
SeriesCX2
ModelT253X6001T0C101
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form Factor2.5"
Capacity1TB
Memory Components3D NAND
InterfaceSATA III
ProtocolSATA
CacheNo DRAM (HMB)
Max Sequential ReadUp to 540 MBps
Max Sequential WriteUp to 490 MBps
Terabytes Written (TBW)200TB
MTBF1,000,000 hours
FeaturesA must-have for beginners who want to replace their traditional mechanical hard drive
Advanced SLC Caching technology
Shock and drop resistant for safe use
ECC (Error Correction Code) function enhances efficiency
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G
Max Vibration Resistance20G (non-operating)
Height7.00mm
Width69.90mm
Depth100.00mm
Forsendelsesvægt0.07 kg
Pakkestørrelse124 × 91 × 5 mm

Andre versioner af denne model

3 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose the 1TB CX2 or one of the other capacities like 256GB, 512GB or 2TB?

The 1TB model gives you 1TB of storage with 200TBW endurance. The 256GB and 512GB drives have lower capacity and the same 200TBW or 400TBW rating, while the 2TB version doubles capacity and raises endurance to 1600TBW. Pick the size that matches the space you need and the write workload you expect.

What does the 540 MBps sequential read figure mean once the drive is installed in my laptop?

In a real machine the drive will deliver up to 540 MBps on large, sequential files when the SATA III link runs at 6Gbps. Everyday mixed workloads and small files will be slower, but you will still see boot and app-load times roughly four times quicker than a mechanical hard drive.

The drive uses SATA III — what does that cap in practice?

SATA III (SATA Rev. 3.0) limits the interface to 6Gbps, so the maximum throughput you can see is about 540 MBps read and 490 MBps write. The drive is backwards compatible with SATA Rev. 2.0, but on a 3Gbps port speeds will be roughly half.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.