Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green or black rectangular circuit board with gold edge connector and black memory chips

Timetec

Timetec 4GB DDR3 1333MHz PC3-10600 CL9 240-pin UDIMM desktop RAM

SKU CH-B9MD-5TGRR

A 4 GB DDR3 desktop module running at 1333 MHz with CL9 latency and dual 1.5 V or 1.35 V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Voltage1.50V
  • ColorBlack PCB

Capacity 4GB

Speed DDR3 1333

Color Black PCB

  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1333MHz PC3-10600 speed delivers responsive system performance
  • CL9 latency and 1.5V / 1.35V voltage ensure stable operation
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Dual-rank 2Rx8 256x8 ICs provide reliable data integrity

4GB DDR3 1333MHz Desktop UDIMM

This Timetec module delivers 4GB of DDR3 memory at 1333MHz with CL9 latency. It uses a 240-pin UDIMM form factor and operates at either 1.5V or 1.35V for DDR3L compatibility. The dual-rank 2Rx8 design uses 256x8 ICs on a black PCB. It is built for desktop systems only.

Suits older desktops needing a basic memory upgrade

This module fits desktop boards that accept DDR3 or DDR3L UDIMM memory at 1333MHz. It is not for laptop SODIMM slots, systems that require ECC registered memory, or builds that need capacities above 4GB. Buyers with motherboards limited to single-rank modules should verify compatibility before purchase.

Runs at 1333MHz with CL9 timing

The decisive specification is the 1333MHz speed rating paired with CL9 CAS latency. This determines whether the module matches the memory controller requirements of the target desktop platform. Systems configured for higher DDR3 speeds will downclock to this frequency.

Fordele

  • 4GB capacity expands multitasking headroom for everyday workloads
  • DDR3 1333MHz PC3-10600 speed delivers responsive system performance
  • CL9 latency and 1.5V / 1.35V voltage ensure stable operation
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Dual-rank 2Rx8 256x8 ICs provide reliable data integrity

Specifikationer

BrandTimetec
ModelMM-G4GD313U7C
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Voltage1.50V
ColorBlack PCB

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will this module work in a desktop that requires 1.35 V DDR3L?

Yes, the module is rated for both 1.5 V and 1.35 V operation, so it will run at the lower voltage when the system requests it.

What motherboard slot does this 240-pin UDIMM fit?

It fits a standard desktop DDR3 DIMM slot with 240 pins; it is not compatible with laptop SO-DIMM slots.

Can I add this 4 GB stick alongside existing DDR3 memory?

You can, provided the other modules are also DDR3 non-ECC unbuffered; the system will run all sticks at the lowest common speed and voltage.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.