Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black USB 3.0 adapter box with SATA and dual IDE connectors plus power cable

WRIARICH

WRIARICH E02 USB 3.0 to SATA IDE Ultra Recovery Converter hard drive adapter

SKU CH-P7H5-3JV4D

Connects 2.5in or 3.5in SATA and IDE drives plus 5.25in optical drives to USB 3.0 at up to 5 Gbps with UASP support

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP support
  • Works with Windows, Mac OS and Linux systems
  • Plug-and-play with hot-swap and LED status indicator
  • Includes dual-head IDE connector for 40-pin and 44-pin drives

WRIARICH E02 USB 3.0 SATA IDE Adapter

The WRIARICH E02 is a USB 3.0 to SATA and IDE adapter designed to connect bare drives to a computer for data recovery or transfer. It supports 2.5 inch and 3.5 inch SATA drives plus 40-pin and 44-pin IDE drives. A 5.25-inch optical drive can also be attached through the same cable.

Suits single-drive recovery and legacy hardware

This adapter suits technicians and home users who need occasional access to one SATA or IDE drive at a time. It works with Windows, macOS and Linux and supports hot-swapping. Buyers who require simultaneous multi-drive access should consider a different solution. The unit includes an on-off switch and LED status indicators for drive protection.

USB 3.0 with UASP reaches 5 Gbps

The single specification that decides fit is the USB 3.0 interface with UASP support, delivering up to 5 Gbps transfer speed. It is backward compatible with USB 2.0 and 1.1. For 3.5 inch IDE drives the included 4-pin power cable must be connected. No driver installation is required for the listed operating systems.

Fordele

  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP support
  • Works with Windows, Mac OS and Linux systems
  • Plug-and-play with hot-swap and LED status indicator
  • Includes dual-head IDE connector for 40-pin and 44-pin drives

Specifikationer

BrandWRIARICH
ModelE02
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Support
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and tro

Spørgsmål om denne vare

Does the WRIARICH E02 adapter get hot or draw much power when running a 3.5-inch IDE drive all day?

The adapter includes an on/off switch and LED status light; for 3.5-inch IDE drives you must connect the supplied 4-pin power cable, which powers the drive directly rather than drawing it through USB.

What cables or ports must I already have on my computer to use this adapter with a 2.5-inch SATA SSD?

You need a free USB 3.0 port (compatible with USB 2.0/1.1) on a Windows, Mac or Linux machine; the adapter provides the SATA data and power connections for the 2.5-inch drive.

Will this adapter recognise an old 40-pin IDE hard drive from a Windows XP desktop alongside my current Windows 10 PC?

Yes, the dual-head IDE connector fits both 40-pin and 44-pin drives, and the adapter supports hot-swapping on Windows 10 back to XP, Mac OS 9/10 and Linux.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.