Zyvpee
Zyvpee 6224 NTDA 172x51mm DC24V 48W case fan
A 170 mm axial case fan with a 51 mm thick aluminium frame, dual-ball bearings and a three-wire 24 V 48 W motor
- TypeCase Fan
- CompatibilityCase
- Fan Size170mm
- Bearing Type2 Ball
- Power Connector3 wires
- ColorBlack
- Dual-ball bearing extends service life
- 24 V DC input simplifies power wiring
- 48 W motor delivers strong airflow
- 172 × 51 mm aluminium frame fits large cases
- Three-wire connector enables speed monitoring
Zyvpee 6224 NTDA 172x51mm DC24V 48W case fan
The Zyvpee 6224 NTDA is a 170mm axial cooling fan built on an aluminium frame for 24V DC operation at 48W. It uses a two-ball bearing and a three-wire power connector for speed monitoring. The black, non-LED design suits industrial or server chassis that require high-airflow circular cooling.
Suited for 24V systems with 172mm mounting holes
This fan fits builders who have a 24V supply and the 172mm by 51mm footprint available in their enclosure. It is not for systems limited to lower-voltage headers or smaller mounting patterns. The three-wire lead also requires a header that can accept a tachometer signal.
24V 48W power rating
The 24V 48W rating is the single figure that decides compatibility; the chassis must deliver that voltage and current through a three-pin header. If the available power rail or connector differs, the fan will not operate correctly.
Fordele
- Dual-ball bearing extends service life
- 24 V DC input simplifies power wiring
- 48 W motor delivers strong airflow
- 172 × 51 mm aluminium frame fits large cases
- Three-wire connector enables speed monitoring
Specifikationer
| Series | 6224 NTDA |
|---|---|
| Model | 6224 NTDA |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 170mm |
| Bearing Type | 2 Ball |
| Power Connector | 3 wires |
| Color | Black |
| LED | Non-LED |
| Features | Circular cooling fan |
Spørgsmål om denne vare
Will the 172 mm by 51 mm aluminium frame fit my 170 mm case fan slots?
The fan measures 172 mm square by 51 mm thick, so verify your chassis has at least that much clearance for the aluminium frame.
How do I connect the three wires to a 24 V DC supply without reversing polarity?
Match the three-wire lead to a 24 V DC header — typically yellow for 24 V, black for ground, and the third wire for tachometer signal.
When should I plan to replace the dual ball bearings in this 48 W axial fan?
Monitor for increased noise or vibration; dual ball bearings last many thousands of hours at 24 V, so replace when audible wear appears.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.0000105BTC
På lager